Author Topic: New 2013 Kymco Agility 50 4T shipped with??  (Read 6944 times)

Rico625

  • Newbie
  • *
  • Posts: 5
    • View Profile
New 2013 Kymco Agility 50 4T shipped with??
« on: September 12, 2012, 11:29:22 AM »
Hi was my new Agility 50 Shipped with a derestricted kit ??
If so what does it consist of.

Thanks Rico

JJJoseph

  • Hero Member
  • *****
  • Posts: 892
  • Kymco Sento
    • View Profile
Re: New 2013 Kymco Agility 50 4T shipped with??
« Reply #1 on: February 15, 2014, 02:59:37 AM »
You don't say where you're calling from, but North American dealers derestrict before delivery.  Don't know about Germany or Netherlands though; everything is restricted over there!

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: New 2013 Kymco Agility 50 4T shipped with??
« Reply #2 on: February 15, 2014, 03:33:18 AM »
..derestricting consists of removing any cdi inhibitors and replacing the drive boss...

..the driven pulleys on the Agilitys are not restricted..

..however, I have seen carburetors that don't have air mix screws...that kinda sucks, since it means you gotta mod the carb if you want to upgrade to an open air intake...
..every mod (action) necessitates a (reaction) mod..

JayAre

  • Jay Are
  • Full Member
  • ***
  • Posts: 113
    • View Profile
Re: New 2013 Kymco Agility 50 4T shipped with??
« Reply #3 on: May 15, 2015, 09:24:56 PM »
My 2013 Agility's carb has a plug over the air mix screw that can be removed to gain access. But, the air mix screw is recessed in the hole & shaped like a 1/2 moon which makes adjusting it a bitch unless you have some kind of special tool.
My wife never asked, " can you make it go faster?" until we bought a 4 stroke Moped. My reply, "yes dear"
2013 Agility 50 de-restricted with 72cc piston & head.
2-2005 Yamaha Zuma's 50cc 2 stroke bone stock

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: New 2013 Kymco Agility 50 4T shipped with??
« Reply #4 on: May 15, 2015, 10:24:06 PM »
My 2013 Agility's carb has a plug over the air mix screw that can be removed to gain access. But, the air mix screw is recessed in the hole & shaped like a 1/2 moon which makes adjusting it a bitch unless you have some kind of special tool.

You can take care of this with a dremel cutting wheel. If you get that cap off you can just cut a slit in the "D" screw and boom, you have an adjustable mixture screw. Another important thing about the new agilitys is the intake manifold comes with a very very restrictive washer plugging it. You can just pull it out, make sure you have the de-restricted main jet installed for this though.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

An Error Has Occurred!

Call to undefined function split()