hello, as i was saying my scooter was very "trembly" and i went to check my transmission yesterday.
the clutch was disassembled , cleaned, greased inthere with xado , used a little sandpaper on the clutch bell and on the 3 ferodo (you know what)
i gresed the rollers inside as they were good and round with no wear (strange) ....& so
i filled the scooter with racing oil XADO Atomic Synthetic Engine Oil 10W-60 !!
+ treatment in gear oil
bought today original air filter .. almoust 20$
but a strange noise at full throtle was irritating me (rattle way ugly)
after 3 hours of mounting/dissmounting the cvt cover and testing the scoot. With starter , without , without cvt cover, without rubber gaseket, with chinesse parts and original, with washers and without ( IT WAS HELL ON EARTH ) i seemd that the center stand was vibrating !! Now it`s taken off.
so if you hear strange noise from cvt take the center stand off problem solved i guarantee.
( before it was rattling at ~60 kmph )
so i`m rather happy now but ...... it seems that the scooter is reving and looss in acceleration. I guess it`s the clutch that`s affected by sandpaper work :-S ... I rode it ~50 km but still persists. Or maybe the leaking grease is causing this (it`s good grease that sticks to parts) ? PLS need advice
