The ramp-plates usually have sharp edges when they come from the factory. These sharp edges are the reason and the cause for this.
So use a fine iron-file and sandpaper and remove equally the sharp edges of the ramp-plates where the rollers or sliders run.
Instruction videos for this very important (!) procedure can be found on the Dr. Pulley Website.
But unfortunately almost nobody knows this...
Thanks for the info [emoji106]
Didn't known about this, and there is nothing on this on the sliders packaging,only a pic showing the proper installation.
Poslano sa mog Lenovo TB2-X30F koristeći Tapatalk
