Author Topic: 2008 Kymco MXU 500 ATV wont start  (Read 7280 times)

The Colourguy

  • Newbie
  • *
  • Posts: 4
    • View Profile
2008 Kymco MXU 500 ATV wont start
« on: December 13, 2016, 06:17:28 PM »
I am having ongoing issues with my Kymco MXU 500 ATV not starting....
Keeps fouling up the spark plugs... It runs great for a while & then for no apparent reason it just won't start (no spark)...
Does anybody know how to fix this issue once & for all??
I have had it fixed several times but it does not stay "fixed" for long & you never know when it will leave you stranded....
Any information on how to fix this ongoing issue would be very much appreciated!!

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7733
  • West Tennessee, USA
    • View Profile
Re: 2008 Kymco MXU 500 ATV wont start
« Reply #1 on: December 13, 2016, 07:45:07 PM »
Try venting the gas cap.

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

The Colourguy

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: 2008 Kymco MXU 500 ATV wont start
« Reply #2 on: December 14, 2016, 02:46:18 AM »
Hey Karl,
The gas cap has a vent hose attached....
I will check tomorrow morning to insure it is not plugged but I think it is OK....
Someone previously told me that it had the wrong size fuel injectors (or something like that), but if that's the case it was built that way originally....??
Any other suggestions or thoughts would be much appreciated!

Mike

randyo

  • Hero Member
  • *****
  • Posts: 1627
  • Farmington, Strafford County, New Hampshire, USA
    • View Profile
Re: 2008 Kymco MXU 500 ATV wont start
« Reply #3 on: December 14, 2016, 12:37:56 PM »
disconnect the fuel line and measure the amount of fuel it pumps, possibly a clogged fuel filter causing inadequate pressure
RandyO
IBA#9560

The Colourguy

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: 2008 Kymco MXU 500 ATV wont start
« Reply #4 on: December 14, 2016, 02:06:53 PM »
Thanks RandyO!
I will try that for sure & will update the forum once I do...
Thanks!!

TLRam1

  • Sr. Member
  • ****
  • Posts: 381
    • View Profile
Re: 2008 Kymco MXU 500 ATV wont start
« Reply #5 on: December 15, 2016, 04:53:38 PM »
If you stop getting a spark it would be something electrical.
Terry
10 Kymco People S 250
87 Yamaha Riva 200 (Sold)
Allen TX (Dallas)
cli-maxridinggear.com

The Colourguy

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: 2008 Kymco MXU 500 ATV wont start
« Reply #6 on: December 15, 2016, 10:06:53 PM »
Hey Terry,
You would think so right...??
It has been an ongoing issue & my last mechanic told me that the injectors on the motor were incorrectly sized causing them to burn out the plug (or something like that)....
Now he could not & would not guarantee that if I paid him the replace the injectors this problem would go away (as it would have cost about $500 to repair), so I told him not to do anything....
I am struggling with the notion that the factory installed injectors were the wrong size & that even though I bought it used it is a 2008 machine & why would this all of a sudden become an issue...??
After speaking with a spark plug expert I was told I might be better to change up the spark plug for one slightly different (something about engine heat or something).... as you can likely tell I am no mechanic so most of this stuff does not make a ton of sense, but I am semi retired now & have to try to repair things myself as I do not have the money to keep paying a mechanic unless they can actually fix the problem (then it may be worth the money)...
Anyway, it was -25c outside today so I will have to wait for things to warm up a little before I can work on it, but any more suggestions as to what the issue might be would be very helpful....
I will post any resolutions I find....
Thanks again!

Mike

Bratman2

  • Full Member
  • ***
  • Posts: 182
    • View Profile
Re: 2008 Kymco MXU 500 ATV wont start
« Reply #7 on: December 16, 2016, 04:41:20 AM »
A 2008 MXU 500 is fuel injected? I would have thought a carb on those years. The NGK CR6E is a one step hotter plug. If you have a carb you could have trash sticking your float flooding the carb. Easy fix, just time consuming!
2019 UXV 700i LE Hunter
2014 MXU 450i
2004 Mongoose 90 (grandson's)
2010 Grizzly 450

TLRam1

  • Sr. Member
  • ****
  • Posts: 381
    • View Profile
Re: 2008 Kymco MXU 500 ATV wont start
« Reply #8 on: December 16, 2016, 07:21:17 AM »
I am thinking something electrical, loose/dirty connection, coil, pickup coil, ground wire, safety switch ie: side stand, battery cables/connections, not sure. Fuel related will not keep it from getting a spark.

If it is sporadic, could be difficult to track down. All I am talking about is the no spark issue, fouling he plugs could be unrelated.
« Last Edit: December 16, 2016, 07:23:06 AM by TLRam1 »
Terry
10 Kymco People S 250
87 Yamaha Riva 200 (Sold)
Allen TX (Dallas)
cli-maxridinggear.com

An Error Has Occurred!

Call to undefined function split()