Finally got Everything to put a top case on my Yager

[InfernoST]

Hi All. I finally was able to track down the adapter plate needed for my Yager and ordered the Givi Monolock E470 with the brake light kit. I just finished installing the brake light kit to the case and the case to the scooter, I figured a few picks were in order. As of now the light in the case is for brake lights only but I'm going to turn it into a running/brake light with a few diodes and a resistor or 2 (at a later date). Now I shouldn't have any issues with storage.

[zombie]

That sure looks sharp inferno! Adding running lights is a great ide

[Hoolander2]

Thanks for sharing these pics, Inferno.  Your Yeager looks sweet and your beautiful garden makes a nice background for the scooter! 

[InfernoST]

Thanks guys.

[shubonker]

I definitely saw you and your new top case today.  Turning onto 65th st from new Utrecht around 12pm?

[InfernoST]

You most definitely did, I was coming from an aquarium store on 55th and 8th and heading to 7 eleven to satisfy a craving I was having for a cherry slurpy. Where were you?

[wordslinger]

...dang...i didnt see either of yooz guyz...

 

[shubonker]

...dang...i didnt see either of yooz guyz...

 

You should move to NY then. 

You most definitely did, I was coming from an aquarium store on 55th and 8th and heading to 7 eleven to satisfy a craving I was having for a cherry slurpy. Where were you?

Haha, i was in my car. 

[InfernoST]

Haha, i was in my car.  

That's cheating. Next time get my attention maybe we can go for a brew or slurpy or two.

[chaosknite]

Hey Inferno, which adapter plate are you using? I recently bought my own Yager and plan on getting a top case. I'm just trying to decide between a Givi E470 and a Shad SH46. Also, is the molded connector on the exhaust side used to hook up the extra brake light? I don't have a multimeter right now to test it out, but can't think of anything else it might be for.

[axy]

You should move to NY then. 

Last time I checked, Utrecht was in Holland!
Now I realize there is one in NY!

[InfernoST]

Hey Inferno, which adapter plate are you using? I recently bought my own Yager and plan on getting a top case. I'm just trying to decide between a Givi E470 and a Shad SH46. Also, is the molded connector on the exhaust side used to hook up the extra brake light? I don't have a multimeter right now to test it out, but can't think of anything else it might be for.

The E470 is nice with plenty of storage however the mount is made by Shad for Kymco and only available through a distributor, needless to say the adaptor plate should accept a Shad case without modification but will need to be modified (Nothing Major, just centering and drilling new holes in the mounting plate) to accept a Givi. I have to dig through my receipts to get you a model number.
  What molded connector are you referring too?

[InfernoST]

Chaosknite, the mount is Kymco part# K0YG58ST.

[chaosknite]

The saying goes a picture is worth a thousand words, so I figure this not so great photo is worth at least a hundred or so. But the connector looks kind of like a really simple trailer connector (maybe only brake lights), which is why I thought it was for the brake light (I don't think it's meant for a trailer). I normally keep it tucked up in the body out of the way.

[InfernoST]

I don't know what that is for and haven't noticed it on mine but I will check it later today. If mine has it I'll meter it out later on. I hardwired the brake light in my case to the harness inside the bike.