..NCY performance cvt upgrade..

[wordslinger]

there was this one time at Band Camp


...her.....

[wordslinger]

...6 grams is th' ticket!!...up from 4.7

..i've never had my scoot's cvt dialed in as well as it is right now...

..acceleration starts out smooth, but quick, and the rpms stay up with no drop-off at all, as it reaches top speed....

..one note on the whole upgrade..

.. the 748 belt is too long...


peace

[shubonker]

How much better is it than your previous set up with the polini(?) var and stock(?) clutch?

[sidthesloth]

Excellent, glad to hear of the good result

[wordslinger]

..well, my old parts were extremely worn..

..Malossi multivar variator, oem clutch with malossi 1000 contra and +15%  leo vince fly springs...

..i've never had this consistent acceleration without dropping rpms all the way up to top speed, which today, topped out at 85 kmh with a moderate headwind..

[wordslinger]

..thanx sid, if this kit holds up, it was a good investment...

[sidthesloth]

That's good. My torque spring turned up today, was tempted to put it in but got to go to work early, tomorrow is a day of so will spend it on the scoot.

[shubonker]

That's great slinger, now i dont know what to do next... transmission kit, or cylinder kit.  Still waiting on my clutch springs, exhaust, free flow filter, and some main jets.  

[wordslinger]

..you getting the 1500 spring?

[wordslinger]

...get your cvt dialed in first..i would bet that 5 gram rollers, 1000 torque and the next above stock fly springs will make you really happy...

[shubonker]

Yea i'm going to dial in the transmission before i put it the other stuff.  I got the 1500 torque spring, should be nice.  Plus i got 1000, 1500, 2000 fly springs to play around with.  Hopefully 5g rollers will play nicely with these springs i bought, i don't want to wait for more rollers, i hate waiting!

[wordslinger]

..i'm anticipating the effects of the 1500 torque spring....you'll probably want the 1000 fly springs...

..i'fe found that increases in the 15-25% range livens up the "stock" A50...

..much over that percentage, and you either rev too high or loo low for optimum performance...

..change out one bit at a time..see what that does for your scoot, then swap out something else...

[wordslinger]

...well, as it's turns out..i have not been entirely satisfied with the NCY parts...

..initially, the parts performed well, but over a very short time, performance has faltered with the ncy bits...

..currently, the only ncy bit i'm running is the variator, and that's because i have nothing better to use...

..gonna go back to Malossi, as soon as the funds are there...


peace

[sticlistul]

so cheap isnt always best solution .... what parts disapointed you ?

[wordslinger]

...all of them...