Suspension Setting?

[Snorvey]

Bearz! Watch out for the bearz!

[Nireen]

LOL YUP!!! I almost run into a deer last summer. Got that on video actually.  I should upload it.

Bearz! Watch out for the bearz!

[kneeslider]

Refer to the attachment.

BLUE is the market to show which setting you're on.

ORANGE is the area where you will notice the 1-5 levels of setting. I have mine on '5'.

[Nireen]

Awesome!  Now where does that tool hook on to to change settings?

Refer to the attachment.

BLUE is the market to show which setting you're on.

ORANGE is the area where you will notice the 1-5 levels of setting. I have mine on '5'.

[mousejunks]

The tip of the tool hooks into the holes. Simply turn the tool while the scooter is on the centrestand. Makes sure the numbers are identical on both left and right sides.

[Nireen]

Now I can't find my tool!  Not like me to lose things either!

The tip of the tool hooks into the holes. Simply turn the tool while the scooter is on the centrestand. Makes sure the numbers are identical on both left and right sides.

[kneeslider]

You don't need the C-spanner. Just get a good grip on it and twist.

[Nireen]

Oh great! 

You don't need the C-spanner. Just get a good grip on it and twist.

[Nireen]

Well that was easy!! Mine were already set on number 3. 

You don't need the C-spanner. Just get a good grip on it and twist.

[Snorvey]

You don't need the C-spanner. Just get a good grip on it and twist.

Jeezus, who are you?

Popeye?

[kneeslider]

Seriously. That's how I do it.
Lifting it up abit to get the notches to turn thru will make it easier.

Jeezus, who are you?

Popeye?

[tvniklas]

Seriously. That's how I do it.
Lifting it up abit to get the notches to turn thru will make it easier.

True that 😁
Just make sure its fairly clean and no stones in there before tvisting/turning

[Nireen]

GOOD POINT

True that 😁
Just make sure its fairly clean and no stones in there before tvisting/turning

[kneeslider]

Loads of stones get logged between the inner and outer tubes.

Nothing much one can do to get them all out.

[Stig / Major Tom]

You don't need the C-spanner. Just get a good grip on it and twist.

I used some heavy gloves when scoot was new. Later added a little lube spray.....but haven't messed with them in a long time.
Quoting Vivo, "With the earth spinning so fast - must be careful not to set them too light!"
Good point.
Stig

Stig