Hey All,
I took some more time the last few weeks and I think I've found all the bugs with my newly acquired MXU 250. I just need some help with parts and possibly tips on what i'm facing.
Cranking: My starter is engaged all the time. I completely removed the solenoid and the starter is still engaging. What I done in the meantime is put a push button starter on the battery wire and it works temporarily. With that said, I'm pretty sure I have a bad starter. I double checked the starter button and it's free and clear of debris. Do you guys recommend the starters on Ebay?
Safety switch: Once I crank the engine and try to engage the transmission, it sometimes try to kill the motor when i put it in gear. I have the foot brake down and the hand brake depressed and it still dies. But then sometimes, it goes in gear with no issues. Is there a safety switch I can check?
Bushings: I noticed that when i'm decelerating, the back end of the ATV is very loose. I looked and it seems like the bushings are gone. Where could i find replacement bushings?
Other parts: I need to replace the front brake pads and air cleaner too. Could I source those from Ebay too or is there a recommended vendor?
Thanks in advance!
Polaraman
