600 Mile Service Parts & Tools - 2018 Xciting 400i ABS - SK80AL-US

[Clampett]

<snip>

Here's the one that isn't in the manual, but after looking around a bit and reading the comments sections on several videos, the consensus seems to be...

Oil Filter Cap: 20Nm or 14.75 Ft/Lb

I still don't have any leaks from Diana, but I am also still a bit worried about that dang gear oil...

One of the strange things to me is the manual lists a range for each torque setting. These(those we listed above) were the minimums.
The Oil Filter Cap has a short range of thread and feels light. 20Nm is the torque for the 6mm bolts also. To me that just seems a bit high for the cap.
I don't mean it is wrong, just seems high to ME. But I'm no engineer or even a real mechanic.
I do tend to worry/panic with aluminum parts(This one is $35) due to my own over zealousness in over tightening before I got a torque wrench.

Still, thanks for the input and update!! Think I'll go now and check the N2 in my tires 

[CROSSBOLT]

It's 78%, Jed. Just like yesterday! Har, har!

[EvilTessmacher]

I noticed that bit about ranges. I just went with the minimums of each range, because I don't trust my torque wrench. It's brand new, and one of those that has a twist-grip scale. I can barely read it for the glare.