« previous next »
Pages: [1]

Author Topic: Wheel Balancing  (Read 2954 times)

sidthesloth

  • Hero Member
  • *****
  • Posts: 2313
  • Kymco ZX50
    • View Profile
Wheel Balancing
« on: May 21, 2010, 12:09:39 PM »
G'day all, yesterday I asked the local bike shop about balancing a scooter wheel, when I mentioned it being the rear wheel they said "no, we don't do them", it seems that they don't have a jig set up for it. I went to our local bearing supplier today to see about a couple of bearings to put in the wheel to balance it at home and it seems that 18 mm bearings are not a common size. After a couple of phone calls he managed to find that they may be available, will find out on Monday. For now I bought two 17mm bearings and set the wheel up to balance it with some stick on weights that I got from a tyre fitting shop. It took a little time and was an interesting endevour. So, to sum up, I won't be paying anyone to balance my scooter wheels again. :D
Logged
ZX50, 47mm cyl. kit, TZR50 CDI. Michelin Pilot Sport tyres,
Next performance mod; pumping the tyres up.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Wheel Balancing
« Reply #1 on: May 23, 2010, 01:18:29 AM »
Save yourself some real grief and get some Dyna Beads and dump 'em in the valve stems. One ounce per wheel did nicely for me. Google dynabeads and there ya are! About 3.50 for each one ounce bag.

Karl
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Wheel Balancing
« Reply #2 on: May 23, 2010, 01:22:39 AM »
Save yourself some real grief and get some Dyna Beads

..dyna beads...what's that..........
Logged
..every mod (action) necessitates a (reaction) mod..

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Wheel Balancing
« Reply #3 on: May 31, 2010, 12:58:36 AM »
Little, heavy ceramic spheres that won't eat up the inside tire casing like sand will and they balance wheels and tires like magic!

Karl
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Wheel Balancing
« Reply #4 on: May 31, 2010, 04:03:45 AM »
http://www.sudco.com/pj1.html   That's the one I'm using
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

sidthesloth

  • Hero Member
  • *****
  • Posts: 2313
  • Kymco ZX50
    • View Profile
Re: Wheel Balancing
« Reply #5 on: May 31, 2010, 06:25:37 AM »
Wow, I thought I was doing well to balance my wheels, shot down in flames.
Logged
ZX50, 47mm cyl. kit, TZR50 CDI. Michelin Pilot Sport tyres,
Next performance mod; pumping the tyres up.

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Wheel Balancing
« Reply #6 on: May 31, 2010, 08:23:03 AM »
A smoking pile! I tried the stick on type, and found they tend to fly off. I think it is the rpm's of the wheel.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

sidthesloth

  • Hero Member
  • *****
  • Posts: 2313
  • Kymco ZX50
    • View Profile
Re: Wheel Balancing
« Reply #7 on: May 31, 2010, 09:04:45 AM »
Never mind, just watch me bounce back :-)
Logged
ZX50, 47mm cyl. kit, TZR50 CDI. Michelin Pilot Sport tyres,
Next performance mod; pumping the tyres up.

art

  • Hero Member
  • *****
  • Posts: 1682
    • View Profile
Re: Wheel Balancing
« Reply #8 on: June 08, 2010, 12:58:10 AM »
Learn something new every day great sight!
Logged
Kymco peoples too many ;) I'm not an expert just a full time hobbiest.

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Wheel Balancing
« Reply #9 on: June 08, 2010, 03:19:53 AM »
It's Kinda like a third boob! Most people can do w/out it, but it's really cool.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Wheel Balancing
« Reply #10 on: June 08, 2010, 08:56:06 PM »
...mmmm third boobie....
Logged
..every mod (action) necessitates a (reaction) mod..

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Wheel Balancing
« Reply #11 on: June 10, 2010, 05:16:42 AM »
In the back... Slow Dancing~
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

sidthesloth

  • Hero Member
  • *****
  • Posts: 2313
  • Kymco ZX50
    • View Profile
Re: Wheel Balancing
« Reply #12 on: September 02, 2010, 08:36:54 AM »
Quote from: CROSSBOLT on May 23, 2010, 01:18:29 AM
Save yourself some real grief and get some Dyna Beads and dump 'em in the valve stems. One ounce per wheel did nicely for me. Google dynabeads and there ya are! About 3.50 for each one ounce bag.

Karl
Yep, found 'em, $19 + $17 shipping.
Logged
ZX50, 47mm cyl. kit, TZR50 CDI. Michelin Pilot Sport tyres,
Next performance mod; pumping the tyres up.

winginman

  • Sr. Member
  • ****
  • Posts: 303
    • View Profile
    • Accugen DNA Service
Re: Wheel Balancing
« Reply #13 on: September 02, 2010, 02:04:53 PM »
Here is a site with the beads. Motorcycle kit for two wheels and applicator $10.50.
http://www.innovativebalancing.com/gallery1.htm
Logged
Jim
09 Kymco 500Ri (His)
04 Aprilia S500 (Hers)
01 Honda GL1800 (Ours)
DNA Paternity Testing www.accugendna.com

An Error Has Occurred!

Call to undefined function split()
Back