HAND MADE EXHAUST

[CONLEY]

OKAY COULDN'T TAKE IT ANYMORE TOOK A 1/16 DRILL BIT TO THE MAIN JET HOPE IT WORKS.

STILL RUNS SO THATS GOOD.

[blue]

let us know how it went

[sidthesloth]

Is that about 1.6mm?

[CONLEY]

YEA THAT WASNT GOOD WAS BOGGING AND WOULDNT GO OVER 30 MPH.

TOOK THE AIR TUBE OFF THE CARB DID BETTER GOES ABOUT 43 MPH

GOING TO STEAL THE JET OFF MY BUDDIES 150 HOPE IT FITS/WORKS

[sidthesloth]

You can solder the jet closed and redrill with a smaller drill.

[CONLEY]

DIDNT THINK OF THAT BUT THAT WAS THE SMALLEST DRILL BIT I HAD GUESS IM GOING TO THE HARDWARE STORE

[CONLEY]

OKAY RE DID THE JET I GOT HER BACK TO NORMAL

ITS QUICKER GET TOP SPEED BUT STILL SOUNDS LIKE ITS LEANING OUT

I'M GOING TO LEAVE IT ALONE RIGHT NOW(AT LEAST FOR TODAY)

[sidthesloth]

Just open your jet a bit at a time until you find the best size.

[CONLEY]

I THINK I WILL BREAK DOWN AND BUY SOME JETS

[art]

  You need a set of torch tip cleaners.then you can open it a little at a time

[CONLEY]

I DO HAVE A BRAND NEW SET OF THOSE BUT I THINK IM GOING TO LET IT RIDE TODAY

GOT A LONG RIDE TONIGHT

[wordslinger]

..hope you don't ride too lean for a long ride...

 

[CONLEY]

shes great untill i get to my top speeds then spits and sputters so i keep her just below that

remember lean is mean melted many a pistons before

[wordslinger]

..ur right...lean is fast...........

..i just hate sayin that, cuz i'm always screamin' DONT RUN LEAN!!...