« previous next »
Pages: [1]

Author Topic: Pilot Jet Size for Pod Filter  (Read 286 times)

Chris0381

  • Hero Member
  • *****
  • Posts: 652
    • View Profile
Pilot Jet Size for Pod Filter
« on: July 01, 2020, 01:26:40 PM »
 I want to give a pod filter a try, and the stock pilot/idle jet is #35.

Its been mentioned I should go 1 to 2 sizes up on the idle jet.

The next size available is #38 https://jetsrus.com/carburetor/carb_keihin_PB_carb_parts.html

So that would be 3 sizes up or 1 size up.

Thanks
Logged
2013 Super 8 50cc 2T Air Cooled Mfg'd 2012
Stock pipe derestriction
Smooth Boss
6.5gm Dr Pulley sliders
Malossi Torsion Controller
Malossi Fly Clutch- yellow springs
Polini Variator
#95 Main Jet
Purple Malossi Contra Spring
42 MPH on the flats with the wind

eamartin

  • Hero Member
  • *****
  • Posts: 550
    • View Profile
Re: Pilot Jet Size for Pod Filter
« Reply #1 on: July 01, 2020, 04:46:51 PM »
Most of the assortments I see for sale come in 32, 35, 38, 40, 42, 45 and up.  So I expect that the next size up for you will be the 38.
Logged

souzamoto

  • Sr. Member
  • ****
  • Posts: 383
    • View Profile
Re: Pilot Jet Size for Pod Filter
« Reply #2 on: July 01, 2020, 05:24:11 PM »
Different jet brands use different size systems
But, if you can get a 38 ithink that would be fine. Then you can fine tune with the mixture screw.
With a Pod, you may also have to increase the Main Jet a size or two.
Logged

An Error Has Occurred!

Call to undefined function split()
Back