Poll

how to troubleshoot ignition system on kymco 250

Mabe fried the starter
0 (0%)
inline fuse???
0 (0%)

Total Members Voted: 0

Author Topic: kymco 250 no power to ignition.horn , lights , blinkers al work, no ignition pow  (Read 267 times)

Dward1957

  • Newbie
  • *
  • Posts: 1
    • View Profile
The bike sat for at least a couple of years .when she finally got around to start it ,she kept turning it over and over and over until it just quit turning over., I'm guessing something got hot and either fried something like the starter or maybe an inline fuse. The 4 fuses under seat are all good.can anyone give me an idea how troubleshoot ignition system

jak51

  • Full Member
  • ***
  • Posts: 104
  • Northeast Ohio
    • View Profile
Make sure the battery is fully charged, and that the side stand is up.  Is the tank full?

Jeff

mousejunks

  • Hero Member
  • *****
  • Posts: 585
    • View Profile
Change the oil, recharge or replace the battery, drain and refill the fuel tank. After a few non-starts you need to open the throttle while starting to vent excess fuel from the combustion chamber.
'09 Kymco Espresso 150i
'11 Kymco Downtown 300i ABS - 79,500km
'17 Kymco Downtown 350i ABS

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14690
  • Rural Ohio
    • View Profile
Red "Kill Switch" position?
Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

An Error Has Occurred!

Call to undefined function split()