Author Topic: A 450i uxv 4x4 no start problem not on the forum....yet  (Read 1349 times)

JNH70

  • Newbie
  • *
  • Posts: 4
    • View Profile
A 450i uxv 4x4 no start problem not on the forum....yet
« on: May 13, 2023, 12:30:51 AM »
I bought my 450i uxv 4x4 new in 2021. It has been running perfectly. All maintenance done as required. Love the thing. Recently though I will turn it on.... dash lights come on and buzzer sounds but no crank, no noise. no anything at all as if it had a bad ignition switch. I have realized if I put it in neutral it starts right up or if I rock it back and forth it starts right up. Yes, I am always pressing the brake pedal when starting.

Is it a transmission position sensor issue?

I read the other posts about starting problems, but my starting problem is not similar. I have power to the on position, but no crank, no nothing unless it is in neutral or I rock it back and forth. Battery is good, connections are good, wires are good.

Thoughts?

Thank you in advance!
JH

mstparker

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
Re: A 450i uxv 4x4 no start problem not on the forum....yet
« Reply #1 on: May 13, 2023, 01:04:11 AM »
Sounds like something is not telling it that the brake is being pressed.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: A 450i uxv 4x4 no start problem not on the forum....yet
« Reply #2 on: May 13, 2023, 03:32:50 AM »
Sounds like something is not telling it that the brake is being pressed.
Bingo! Bet you are right!
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

JNH70

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: A 450i uxv 4x4 no start problem not on the forum....yet
« Reply #3 on: May 13, 2023, 12:17:43 PM »
Thank you for your thoughts! I will investigate the brake observations.

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14690
  • Rural Ohio
    • View Profile
Re: A 450i uxv 4x4 no start problem not on the forum....yet
« Reply #4 on: May 13, 2023, 01:19:45 PM »
Off-road Kymcos have a one year warranty?, not 2 like the 2 wheel models?
Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

randyo

  • Hero Member
  • *****
  • Posts: 1689
  • Farmington, Strafford County, New Hampshire, USA
    • View Profile
Re: A 450i uxv 4x4 no start problem not on the forum....yet
« Reply #5 on: May 13, 2023, 02:34:43 PM »
have you tried starting in neutral?   brake do not need to be depressed in neutral, if it starts, you have narrowed the problrm to the brake switch
RandyO
IBA#9560

JNH70

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: A 450i uxv 4x4 no start problem not on the forum....yet
« Reply #6 on: May 13, 2023, 10:47:34 PM »
Yes, it will start in neutral or if I rock it back and forth it will start in park. Battery is strong all wiring and connections are good. I have played with the brake adjustment and it does not really effect anything. I am investigating if there is another brake switch and anything related to the transmission position relative to starting.

I got a repair manual but it is no help with this particular problem. I am using it to go through every connection, sensor and switch related to the brakes, transmission and starting. It is a very odd problem.

JNH70

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: A 450i uxv 4x4 no start problem not on the forum....yet / RESOLVED
« Reply #7 on: May 14, 2023, 07:00:02 PM »
Well after extensive checking of everything I could think of it seems it is a brake pedal or more precisely a brake adjustment issue as Randyo had noted and mstparker reiterated.

Today I adjusted the pedal multiple times in different positions and it seems, at least on my 450i, that I have a sweet spot in the pedal adjustment when if it is not in that sweet spot it produces the power on - no start. I had adjusted it before but I guess I did not get it in the sweet spot so it was consistent.

Anyway....thank you all for you observations and for now this is resolved.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: A 450i uxv 4x4 no start problem not on the forum....yet / RESOLVED
« Reply #8 on: May 14, 2023, 11:08:33 PM »
Well after extensive checking of everything I could think of it seems it is a brake pedal or more precisely a brake adjustmehnt issue as Randyo had noted and mstparker reiterated.

Today I adjusted the pedal multiple times in different positions and it seems, at least on my 450i, that I have a sweet spot in the pedal adjustment when if it is not in that sweet spot it produces the power on - no start. I had adjusted it before but I guess I did not get it in the sweet spot so it was consistent.

Anyway....thank you all for you observations and for now this is resolved.
Find the switch and adjust if mechanically activated or replace if hydraulic pressure activated.
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

randyo

  • Hero Member
  • *****
  • Posts: 1689
  • Farmington, Strafford County, New Hampshire, USA
    • View Profile
Re: A 450i uxv 4x4 no start problem not on the forum....yet
« Reply #9 on: May 15, 2023, 12:39:07 AM »
I know that mine is due for adjustment, I never use park, I always put it in neutral and use the parking brake, but if it stalls for some reason while driving, I just depress the brake in what gear I'm in, I've noticed that I have to use a heavier foot as of late.
RandyO
IBA#9560

An Error Has Occurred!

Call to undefined function split()