Winter Time - Give & Take advices

[Nori]

Well everytime i see my kymco in garage i think anything to modify
its passion i think , so it may be easy if we share something we know about our moto's
So i decided and bought polini variator + castrol oil 10w40 + brake fluid dot 4 + gear oil
i bought from ebay so i have to wait ..
changing gear oil :
changing scooter oil not for every kymco like 2t 2010+ :
--------------
Modify the look
pretty good expamle :
Well it seem good because i have the same color
-----------------------------------

Nice led light  blinkers and brake light

----------------------------------
Maybe im not the person who has a good knowledge about moto's but as far i learned i presented here

Dont hesitate to give any advice for taking care or modify the look

[Nori]

before



after







Hope u like it

[Nori]

Im going to work hard this week :p
More photos during the week.

[Nori]

Position lights converted to ultrabright LED
They look very good through...




Today i received my parts from ebay polini variator and motul oil 10w40
Tomorrow im going to install the vario by a mechanic of scooters , is a big day no more limits 50km/h is not good option for such a beast !



After install of polini vario there was like 10% increase of acceleration and no more than 60km/h even downhill...
Then i cut the cdi box restriction and the performance was better for 25% and takes 60km/h(37 mph) easier and top speed is 65 km/h (40 mph) against wind today , and downhill not more than 70km/h (43mph)
Mechanic told me you dont need to change the oil its in good condition you can do that after a month
maybe i'll have better performance with motul oil specific for 4t engine !

[Nori]

Time to work again
winter time...
Time for polish
speedometer converted to led , boys i recommand to you looks pretty good from stock

[Stig / Major Tom]

Hello Nori,
NICE job on the scoot and with the pictures! Thank you for sharing!
Winter here, too. Dr Pulleys go in soon.
Regards from Ohio, Stig

[Vivo]

Good thing you have winter...Lol!  I wish I can have time to do mods... thanks for sharing!

[Nori]

Thanks guys , more photo after polish if i would be able to do that on plastic , a lot of work i have to do valve clearance , fuel filter , air filter and spark plug to change ...

[Nori]

I had some time this weekend and the polish is done
as far i asked some people who make polish they didn't recommanded me the polish machines because the plastic gets hot so i had to do myself by hands and a little cloth
yup maybe a little boring but the results are the way i wanted the scratches are by 60% gone and they look much better than before because of hand washing scratches...
I bought a Abro Polish it was one of the most expensive in the store
There's more work to do with other parts too...

Before


After


Before


After

[Vivo]

Very very nice....   

[Nori]

So as i said the reflect is noticeable , if you are having the same issue polish it
i finished my scooter yesterday now its complete and happily working again :p
i also polished the speedometer plastic and the results were very very good it had a
lot of scratches but not anymore the clarity is much better
checked valve clearance but it was 004inch/0.10 mm and didn't need to adjust
anyway it needs some more work ,new  brake fluid , engine oil , transmission oil , and new rear brakes...