Author Topic: 2007 People 50 rough start and whine noise  (Read 1304 times)

pa00206

  • Newbie
  • *
  • Posts: 2
    • View Profile
2007 People 50 rough start and whine noise
« on: February 02, 2012, 06:55:55 PM »
Just recently noticed that right when you start to accelerate, he scooter kind of vibrates roughly before taking off. Also, at about 30 and 37mph I hear a whining noise coming from the tranny. What do I need to do?

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: 2007 People 50 rough start and whine noise
« Reply #1 on: February 02, 2012, 08:36:16 PM »
..it could be residue on your clutch pads, causing the vibration..

..a whining noise is not uncommon..

..a good cvt inspection is definately in order..


peace
..every mod (action) necessitates a (reaction) mod..

spidrgr

  • Newbie
  • *
  • Posts: 27
    • View Profile
Re: 2007 People 50 rough start and whine noise
« Reply #2 on: February 22, 2012, 04:51:12 PM »
Checked your belt lately?

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: 2007 People 50 rough start and whine noise
« Reply #3 on: February 23, 2012, 12:25:09 AM »
Maybe worn out rollers causing the belt to slip. If more than a year since you have opened the cvt.. Do so, and check it all out. I would get a new belt/ rollers first anyway. If it's more than a year
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

Peters

  • Hero Member
  • *****
  • Posts: 1582
  • In Glock I Trust
    • View Profile
Re: 2007 People 50 rough start and whine noise
« Reply #4 on: February 23, 2012, 06:33:52 AM »
Mine shuddered on take off all the time when it was stock. Started after about 100 miles. It was a major concern for a long time. Other people on here with People 50s have complained about the same thing. Mine also had a funny noise at just above 30mph. Both symptoms stopped when I changed the variator, rollers, and clutch springs. Unfortunately I did them all at the same time so can't tell you what resolved the issues. The vibration could have been residue on the clutches, like wordslinger said, as I did take some light grit sandpaper to them. Also cleaned the bell out with brake cleaner.
« Last Edit: February 23, 2012, 06:45:55 AM by Peters »
*2010 People 50 2t with 70cc kit and more
*2001 ZX-50 beater

An Error Has Occurred!

Call to undefined function split()