ERmax High Protection windscreen

[JustWantToRide]

Are these really $95.00 (Ninty five us dollars)?  That seems awfully expensive.

$59.99 at Chaparral-racing.com...

http://www.chaparral-racing.com/Product/acerbis-flash-handguards/257-217908-0001.aspx

[juanpauk]

Sorry for the delay, was away on a trip for the weekend with the Mrs on the Dowtown from London to Calais, first time on the Eurotunnel for me.

Here is a video of how to mount the Acerbis handguards on a MP3, only difference is that you need to keep the bar end in position, otherwise it will clash with the windshield.

http://www.youtube.com/embed/qeJwPEL_oCk

Also enclosing a picture of how it looks on my scooter, is a bit dak as I took it on the eurotunnel.

[TANWare]

my concern would be hitting the guard. I know alot of others use these with no issue but that would always be in the back of my head. Especially when weraing heavy gloves....................

[scootinChris]

Which wiring, the HID's or the mirror leds or both?

Hi racewalker,

In this thread you mentionned about the LEDs.
I figured out how you did the wiring. I'm just corious where you mounted the relays?
If you have picks of the HID wiring, then please put them in the HID thread...

[racewalker]

Hi racewalker,

In this thread you mentionned about the LEDs.
I figured out how you did the wiring. I'm just corious where you mounted the relays?
If you have picks of the HID wiring, then please put them in the HID thread...

Take the cover off the handle bars, there is lots of room. I just wire tied them on. One screw in each end of the cover and it just snaps appart.

[fshfindr]

$59.99 at Chaparral-racing.com...

http://www.chaparral-racing.com/Product/acerbis-flash-handguards/257-217908-0001.aspx

Thanks, I'll get them now.

[scootinChris]

Take the cover off the handle bars, there is lots of room.

Where do you get the +12V from?

[racewalker]

Where do you get the +12V from?

I hooked into the wire for the charger plug in the glove box. Just change the fuse. It is .8 amp I have 4 amp on mine now well below what the wire will take.

[scootinChris]

I hooked into the wire for the charger plug in the glove box. Just change the fuse. It is .8 amp I have 4 amp on mine now well below what the wire will take.

Hmm that explains why my plug is dead
Tried to plug in tire pump and that did not work... 
Guess I have to open the tuperware to get to that fuse.

[racewalker]

Very busy at work, just saw your message. The fuse is just by the plug, small round fuse.

[full of days]

I got 2 auto relays & am unsure how to wire the handguards for the turnsignals.  How do i take the AAA battery terminals & wire it to run off the scooter battery?