Yes you can convert to AC. You can use a Kymco 50cc-150cc stator/flywheel. You will also have to add a regulator/rectifier, and a CDI. To do this you need either the entire wiring harness to match or re wire yours to fit. The only real advantage is being able to run w/ a dead or missing battery. Say your dc stator goes bad while riding... the scoot will run until the Batt. dies, and that is it. An AC will continue as if nothing has happened. For me to do this type of job it takes Approx. 3hrs. Most shops will not do it however because of un-real customer expectations... and the cost to customer. Try looking for a TRASHED but running AC fired scoot CHEAP, and you will have all the bits to do it yourself.