Restricted rear pulley on 2010 People 2t

[Peters]

Finally giving some attention to my CVT today. Got some new rollers and the belt I bought almost a year ago  . Anyway, I have some pics of my rear pulley. I remember wordslinger had some pics of the restriction in the rear pulley.


I'm guessing that little ridge inside there is the restriction? Is there anyway to remove it or do I need a whole new pulley?

[streido]

Looks like a restriction to me 

Cant you just dismantle the torque drive off and hacksaw the bit off? Or just buy a new torque drive rather than the whole pulley?

Im assuming the restriction part is on the torque drive side?

[Peters]

Yes it's on the torque driver(moveable) side... Yeah I'll have to search around for a new driver or pulley

Well I put the new rollers and belt on and have mixed results. I got 5g and 6g rollers. Started with the 5g and they were too light. I put the 6g rollers in and I think they're still a little light. I have a red contra spring so I think I need pretty heavy rollers. Feels like I'm slightly above the power band. Not as much torque as I had before. Wish I had a damn tach  . Like I said I have mixed results. When I went downhill I hit 55+. Which is definitely the fastest I gone  . I attribute this to the new belt. It's a little bit longer than oem.


... So, I just weighed my old rollers. 9.5g! I forgot I had really heavy rollers in  . I think I need either 7 or 8 gram rollers with the red contra... I could put the yellow contra spring back in and see if the 6g rollers work better with that but... It's in the Z  ... and the Z is out at my dads... What to do . Probably going to order some more rollers  ... I don't f'in know