Ok the digital dial indicator says:
Yager
Wheel (near bead) varied from -0.40mm to +0.53mm
Tire (side wall) -0.63mm to +0.1mm
People 150 (doesn't have a problem - used for comparison.)
Wheel -0.13 to +0.1mm
Tire 0mm to -0.38mm
Randy said the run out spec was 2mm - both these scoots are within that spec, but the P150 is tighter.
Next I'll check to see if the rear wheel is mounted perfectly on axis with the center of the bike.
(This may just be a defective rear tire, but I like to be sure before doing the work. It's a bear getting the rear tire off of a People 150. Is the Yager just as bad ?)