« previous next »
Pages: [1]

Author Topic: Heat cycle?  (Read 1682 times)

Raindrop

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Heat cycle?
« on: December 02, 2012, 06:54:11 PM »
How long should i let it run. ?
What temp before let cool down?

And does anyone use stock pet cock or am i better off taking off?
Logged
2004 kymco super fever
48mm Bbk
Polini variator
High flow intake
4-slot reeds
24mm oko

Raindrop

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Re: Heat cycle?
« Reply #1 on: December 09, 2012, 01:57:13 PM »
Wow great info.  lol
Logged
2004 kymco super fever
48mm Bbk
Polini variator
High flow intake
4-slot reeds
24mm oko

LoveMyKymco

  • Sr. Member
  • ****
  • Posts: 491
    • View Profile
Re: Heat cycle?
« Reply #2 on: December 10, 2012, 12:32:30 AM »
If you have a temp gauge let it hit at least 250F and shut it off and let it cool down past 100 F around 4-10 times. I would ride it around very slowly just hitting the throttle every once in a while doing a lot of up and down on the rpms not staying the same rpm for long or high rpms. Thats just for heat cycles, then comes break in.
Logged
My 82 mph Killer Full MHR zx50 build (now 91 mph gps verified)
http://www.kymcoforum.com/index.php?topic=7795.0
My Fabrizi/MHR "can it cost anymore?" build
http://www.kymcoforum.com/index.php?topic=12146.0;topicseen

Raindrop

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Re: Heat cycle?
« Reply #3 on: December 10, 2012, 01:06:49 AM »
Ok waiting for jets came stock with 107 or 108 ... but cold weather kicking in here ..
What's the break in part .. and is Stock pipe bad for it?
« Last Edit: December 10, 2012, 06:58:30 PM by Raindrop »
Logged
2004 kymco super fever
48mm Bbk
Polini variator
High flow intake
4-slot reeds
24mm oko

An Error Has Occurred!

Call to undefined function split()
Back