« previous next »
Pages: [1]

Author Topic: NO SPark  (Read 723 times)

Jsquared

  • Newbie
  • *
  • Posts: 20
    • View Profile
NO SPark
« on: July 30, 2013, 11:50:11 PM »
Help I have no spark changed ignition coil cdi box grounds are good checked reckecked and replaced!! I used a light tester just to see if i was getting power to ignition coil i am but still no spark so I decided to ground out one end of the light tester and stick the other end in the sparkplug wire hole it flickers when I turn the bike over so I am guessing it is getting power but why no spark? it is my understanding the cdi box tells the ignition coil when to send spark so maybe I have two badd cdi boxes?
Logged

Resolve

  • Full Member
  • ***
  • Posts: 106
    • View Profile
Re: NO SPark
« Reply #1 on: July 31, 2013, 03:52:57 PM »
I am assuming you made sure the wire going to the plug is ok as well.  I know you said you stuck your tester and it was flickering, but it may still have a break or something internal.  So could provide power to light a tester but not enough to fire a plug.  Have you changed plugs just to make sure the plug is not bad?

Just a thought. 
Logged

tortoise

  • Hero Member
  • *****
  • Posts: 558
    • View Profile
Re: NO SPark
« Reply #2 on: July 31, 2013, 04:14:39 PM »
Test trigger Ohms . . potential replacement.
Logged

An Error Has Occurred!

Call to undefined function split()
Back