Author Topic: visor replacement  (Read 3292 times)

08087

  • 09' Peoples 200, NJ
  • Hero Member
  • *****
  • Posts: 1373
    • View Profile
visor replacement
« on: October 09, 2013, 08:10:34 PM »
My visor on my full face is getting marred up, a bit scratched etc. are they an easy replace are any brands better then the others, what should I expect to pay?

Thanks!
This posting is provided “AS IS” with no warranties either expressed or written and confers no rights. You assume all risk for your use, the author is not responsible for your inability to understand logic, ambiguous references, sarcasm, the imaginary friends living inside my head or William Shatner

mnpugdog

  • Sr. Member
  • ****
  • Posts: 285
    • View Profile
Re: visor replacement
« Reply #1 on: October 09, 2013, 09:13:14 PM »
Very easy to replace. What kind of helmet do you have. Most visors are around $25 give or take.


TroutBum

  • Hero Member
  • *****
  • Posts: 1211
  • 2012 Like 200i (sold)
    • View Profile
Re: visor replacement
« Reply #2 on: October 09, 2013, 10:23:16 PM »
I have a mechanic visor on my Scorpion helmet. I think I paid around $25 for a replacement. It was quick and easy to swap out old for new. You shouldn't have any issues changing out yours.

Vivo

  • Hero Member
  • *****
  • Posts: 4980
    • View Profile
Re: visor replacement
« Reply #3 on: October 10, 2013, 02:19:47 AM »
Visors do not have standard designs and shapes.. a visor of a different brand might not fit your helmet...   Unless there are special visor brands that make them for most helmet brands....

de-dee

  • Sr. Member
  • ****
  • Posts: 286
    • View Profile
Re: visor replacement
« Reply #4 on: October 10, 2013, 02:53:28 AM »
  I have a few helmets and I take them in when I buy a new sheild, they are not the same, 

MassScoot

  • Hero Member
  • *****
  • Posts: 508
    • View Profile
Re: visor replacement
« Reply #5 on: October 10, 2013, 11:58:13 AM »
I have a mechanic visor on my Scorpion helmet. I think I paid around $25 for a replacement. It was quick and easy to swap out old for new. You shouldn't have any issues changing out yours.

TroutBum: I love Scorpion helmets. I own three & think they are built like a tank & not super expensive.
Gloucester, MA. (Home of the Perfect Storm)
2012 Silver Kymco GT300i (Biondi Windshield/Shad SH40 Cargo Topcase)
2015 White Honda PCX150 (Shad SH37 Topcase)
2013 Yellow Lance PCH125 (Shad SH33 Topcase)

AMAC1680

  • Hero Member
  • *****
  • Posts: 1076
  • Outdoorsman, Advocate, Paraplegic
    • View Profile
    • SEGS4VETS
Re: visor replacement
« Reply #6 on: October 10, 2013, 01:25:08 PM »
TroutBum: I love Scorpion helmets. I own three & think they are built like a tank & not super expensive.

I also have three exo-100 , 200 and 2000.

I think the best buy is the EXO-200 now replaced by the  EXO 250. The 200 could be had for under a hundred bucks and it was both DOT and SNELL, I know there are differing thoughts on this.
It's interesting that the new 250 has nothing saying its SNELL.

It also came with a clear shield and a visor.

Be Big,
AMAC


www.SEGS4VETS.org
2017 Lance Cali Classic 200i
2013 SYM RV200
2013 Kymco Downtown 300
2010 Lance Cali Classic-sold
1973 VW Dune Buggy
1974 VW Meyers Manx

AMAC1680

  • Hero Member
  • *****
  • Posts: 1076
  • Outdoorsman, Advocate, Paraplegic
    • View Profile
    • SEGS4VETS
Re: visor replacement
« Reply #7 on: October 10, 2013, 01:27:36 PM »
Sorry I'm taking part in a hijacking.......

08 what helmet needs the replacement ?
www.SEGS4VETS.org
2017 Lance Cali Classic 200i
2013 SYM RV200
2013 Kymco Downtown 300
2010 Lance Cali Classic-sold
1973 VW Dune Buggy
1974 VW Meyers Manx

08087

  • 09' Peoples 200, NJ
  • Hero Member
  • *****
  • Posts: 1373
    • View Profile
Re: visor replacement
« Reply #8 on: October 10, 2013, 07:19:26 PM »
I don't know the name of it without looking at it. Bike is in the garage until at least the weekend, we've got a Nor' Easer hitting the coast right now and they think it's going to stall over us. Will get back as soon as I'm able to ride safely again.

Thanks!
This posting is provided “AS IS” with no warranties either expressed or written and confers no rights. You assume all risk for your use, the author is not responsible for your inability to understand logic, ambiguous references, sarcasm, the imaginary friends living inside my head or William Shatner

MassScoot

  • Hero Member
  • *****
  • Posts: 508
    • View Profile
Re: visor replacement
« Reply #9 on: October 10, 2013, 07:44:08 PM »
I also have three exo-100 , 200 and 2000.

I think the best buy is the EXO-200 now replaced by the  EXO 250. The 200 could be had for under a hundred bucks and it was both DOT and SNELL, I know there are differing thoughts on this.
It's interesting that the new 250 has nothing saying its SNELL.

It also came with a clear shield and a visor.

Be Big,
AMAC

AMAC: I own 2 Red (Bright Red, not Burgundy color) EXO-200's. These are half-faced helmets & I scored another because I loved my original so much. As I recall, I paid $129.00 from my local dealer, then found the 2nd one on ebay for $100.00 shipped. I also have the EXO-100 which I love! It's my summer scooter helmet. You got to love the retractable visor on the EXO-100. You're correct. The EXO-200 has both DOT & SNELL rated. Maybe Scorpion is cutting some corners? Either way, They really make a real solid helmet for the price if you ask me. I have never looked beyond Scorpion. I know here's some decent mid-priced helmets made by HJC etc. But (like you) I'll stay with Scorpion myself.
Gloucester, MA. (Home of the Perfect Storm)
2012 Silver Kymco GT300i (Biondi Windshield/Shad SH40 Cargo Topcase)
2015 White Honda PCX150 (Shad SH37 Topcase)
2013 Yellow Lance PCH125 (Shad SH33 Topcase)

08087

  • 09' Peoples 200, NJ
  • Hero Member
  • *****
  • Posts: 1373
    • View Profile
Re: visor replacement
« Reply #10 on: October 13, 2013, 09:17:16 PM »
OK the helmet is made by H J C. Any clues? When looking at the helmet front view there is a black plastic switch on the right or drivers view left side, but when I click it nothing much seems to happen.
This posting is provided “AS IS” with no warranties either expressed or written and confers no rights. You assume all risk for your use, the author is not responsible for your inability to understand logic, ambiguous references, sarcasm, the imaginary friends living inside my head or William Shatner

Vivo

  • Hero Member
  • *****
  • Posts: 4980
    • View Profile
Re: visor replacement
« Reply #11 on: October 14, 2013, 01:33:45 AM »
OK the helmet is made by H J C. Any clues? When looking at the helmet front view there is a black plastic switch on the right or drivers view left side, but when I click it nothing much seems to happen.

Like I mentioned before, get the original visor for your specific helmet model to match...

http://www.racevisors.co.uk/category/visors-genuine-hjc


Btw, that switch on the side is a lock to prevent the shield from flying open during high speeds...


mnpugdog

  • Sr. Member
  • ****
  • Posts: 285
    • View Profile
Re: visor replacement
« Reply #12 on: October 14, 2013, 06:13:38 PM »
OK the helmet is made by H J C. Any clues? When looking at the helmet front view there is a black plastic switch on the right or drivers view left side, but when I click it nothing much seems to happen.

On all HJC visors there is a model number of the visor on it. Once you have that you can order one that will fit. Or if you know the model number of the helmet I can also help you out that way.


08087

  • 09' Peoples 200, NJ
  • Hero Member
  • *****
  • Posts: 1373
    • View Profile
Re: visor replacement
« Reply #13 on: October 16, 2013, 07:53:18 PM »
Thanks, next time I ride I'll take a closer look.
This posting is provided “AS IS” with no warranties either expressed or written and confers no rights. You assume all risk for your use, the author is not responsible for your inability to understand logic, ambiguous references, sarcasm, the imaginary friends living inside my head or William Shatner

An Error Has Occurred!

Call to undefined function split()