People 300GTi vs DT300i

[moparkid]

Does anyone know whether or not the People GT 300i and the DT 300i uses the same engine/drivetrain config?

And as I have had to order a few replacement parts, I noticed there were two different models listed; the SK60AD and the SK60AH. I dont know the difference or how to tell or where to look to find out. Found nothing in the manual.

One last question. I just flipped the odometer past 7500 miles on my DT(bought new in May). Would I know from feel whether or not my belt and rollers need replacing or should you just do it and have peace of mind?

[de dee]

the two scooters have the same engines, same oil filter , different air filter,    and the two numbers are age of scooters, I think the new model is 2010 or 2011,  very little difference in models, small change in variator size,  I got one of those, and the inside is bigger, but were the rollers are it is the same, might be different in the slope of the slide of the rollers,

[Scootaloot]

Moparkid, I have a 2012 Gti and have turned over 29k in 18 months. Both belts ran 14 k but the last belt looked rough. I will change at 13k next time. Go with 14 g sliders as they improve performance over stock rollers.(20x12 if I remember correctly). Several threads on sliders. Rollers at 14k had zero wear. Last belt I started sensing it was worn at about 12.5 k. I think you can wait a bit before changing.

[moparkid]

thanks scoot, you too dedee.