Author Topic: Aftermarket exhaust options  (Read 4691 times)

bongoman

  • Sr. Member
  • ****
  • Posts: 312
    • View Profile
Re: Aftermarket exhaust options
« Reply #15 on: January 31, 2014, 05:31:15 AM »
I like the way mine sounds with the baffle or db killer in it. There are 2 in this model, one of which is optional. Yes to the FI computer compensating. I made an air filter using Unifoam from my local scooter shop and the combination of filter and exhaust made a noticeable difference. Once I got my right hand back under control, mileage went up a couple over stock.

It is also maybe 7 to 10 pounds lighter right on the rear axle. Looks cool as well as sounds good.
2009 Xciting 500
2015 Lance Cali Classic 150
Adventure is a two-wheeled journey

speedee86

  • Full Member
  • ***
  • Posts: 122
  • 2012 Kymco Xciting 500 RI ABS
    • View Profile
Re: Aftermarket exhaust options
« Reply #16 on: January 31, 2014, 03:49:14 PM »
I like the way mine sounds with the baffle or db killer in it. There are 2 in this model, one of which is optional. Yes to the FI computer compensating. I made an air filter using Unifoam from my local scooter shop and the combination of filter and exhaust made a noticeable difference. Once I got my right hand back under control, mileage went up a couple over stock.

It is also maybe 7 to 10 pounds lighter right on the rear axle. Looks cool as well as sounds good.

Awesome. Thought so. Ya for EFI lol. I wanna get some sound out of it for sure. With this slip on and your filter, are your rpms noticeable lower at around let say 70 mph. Stock mine are at 6250 rpm at 70mph. I just dont want them to go higher cause around there seems to be the sweet spot for highway mileage and speed as far as efficiency goes. You still planning on selling that pipe?

Also another question since we seemed to have re opened this old thread lol, anyone try out one of the universal slip on shorty style exhausts. I would imagine any slip on would work on these as long as the pipe diameter is the same. I know efi will compensate for it but carbs will need rejetting. I jave seen thing online where people have put pipe of tje same diameter on their scoots and the pipe were made for a different bike but still fit. Make sense. I just wanna get all the feedback I can before I male any descisions. And im sure im not the only one with these questions :)
I know cars and that wouldnt be an issue but seems bikes being smaller scale, little things like these have more of an impact.
always leave yourself an exit incase you get stuck in a pinch. RIDE SAFE!

bongoman

  • Sr. Member
  • ****
  • Posts: 312
    • View Profile
Re: Aftermarket exhaust options
« Reply #17 on: February 02, 2014, 12:12:04 AM »
Here's where it gets kind of tricky . . . with the filter and exhaust mods, the engine spins up quicker, acceleration is a bit faster, and depending on conditions, highway rpms can be lower or higher. If that makes any sense. The engine will red-line quick and if I ease off the throttle some, then speed stays the same and rpms drop. It's like the cvt changes gears. It's hard for me to explain as I am not a mechanic. Other people who are more engine savvy can address things like back pressure torque when all the rubber bands are wound tight and . . . well, you get my drift.

Mileage has gone up just a tad, however, I am not all that concerned with mileage. It's the fun factor that counts.
2009 Xciting 500
2015 Lance Cali Classic 150
Adventure is a two-wheeled journey

speedee86

  • Full Member
  • ***
  • Posts: 122
  • 2012 Kymco Xciting 500 RI ABS
    • View Profile
Re: Aftermarket exhaust options
« Reply #18 on: February 02, 2014, 01:53:24 AM »
I am not all that concerned with mileage. It's the fun factor that counts.

100% agree, afterall, thats the reason im lookin into exhaust, more sound, more fun :)
always leave yourself an exit incase you get stuck in a pinch. RIDE SAFE!

An Error Has Occurred!

Call to undefined function split()