« previous next »
Pages: [1]

Author Topic: Low compresion Super9s  (Read 1540 times)

yogi

  • Newbie
  • *
  • Posts: 25
    • View Profile
Low compresion Super9s
« on: September 21, 2009, 06:48:36 PM »
Hi guys just wondering what the compression should be on the Aircooled super 9, Ive carried out a compresion test and it's only reading about 80 psi at WOT spun over about 10 times......Any help appreciated  :)
Logged

OldGuy

  • Full Member
  • ***
  • Posts: 188
    • View Profile
Re: Low compresion Super9s
« Reply #1 on: September 21, 2009, 11:44:12 PM »
To take an accurate compression test the motor needs to be fully warm and the throttle fully open. Cold and/or the throttle closed will cause low readings.
Logged
OldGuy
Wanna be GrandVista rider

Inside every old person is a young person wondering,
"What the heck happened?"

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Low compresion Super9s
« Reply #2 on: September 23, 2009, 12:06:38 AM »
Should be right at 100. You may want to put in a set of rings. You can take the glaze off the cylinder w/ 600 grit emory paper, and a good oil. ONLY CUT in a circular motion around the inside. Never from top to bottom
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

yogi

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: Low compresion Super9s
« Reply #3 on: September 23, 2009, 06:06:10 PM »
Thanks for the replys guys, i'll check it again tomorow when it's warm .
Logged

An Error Has Occurred!

Call to undefined function split()
Back