Hi there! My angry ex basically ripped apart/off any parts easily damaged on my '09 Venox along with kicking her over. I've got most of it back to how it should be (more or less) except the mirrors, and idle/choke adjustment. I have the screw, but I don't know where it goes. Could someone please send me a pic of where the adjustment goes to, and possibly the assembly removed? The bit I have and can't find the home for is the little black headed knob on the right side of the engine between the carbs, and a rubber tube attached to it that terminates in a little threaded end. Am I missing a piece, or can I simply not find where to put it? Pic attached. I love this bike, she's taken me on a 964 mile trip 4 times now, through a flood, all along with being my daily ride, with no issues until this idle deal and some bogging down from a sticky carb float before her last carb clean. I want her back to how she should be, and beyond this little issue, a carb clean, oil change, mirrors, and paint, we're almost there. The right side of the engine is shown in the second pic with the adjustment placed where it came from and circled in red. All I need to know is where the end goes. OOOOH! Or can I entirely bypass any need for it by adjusting the throttle to stay on just enough to keep her idling where she should be? Or is that bad for her? In either case I'd like to get the idle adjustment back on, but I shall see if this will work as a temporary fix.
