Author Topic: Not starting, key is in "on" position but not getting lights or anything on dash  (Read 1901 times)

kbshaq

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Connected the battery tender, but it's not charging (i.e., flashing red light)

Can I jumpstart the battery with a car?

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Not a great idea, but if you have to do it off a car that is not turned on. If your battery is dead it won't run the fuel injection after you take the jumpers off.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

kbshaq

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Not a great idea, but if you have to do it off a car that is not turned on. If your battery is dead it won't run the fuel injection after you take the jumpers off.

Thanks!   Can't believe this .. this is a brand new People, too.
All the fuses look okay ... I'm not sure what it could be.

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Put a meter directly ON the battery terminals. If you have +12v there then you have a wiring issue. Check that out, and let us know what you get.
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

Stanley1950

  • Newbie
  • *
  • Posts: 25
    • View Profile
Check your run/stop swith on the right handle bar. Make sure it is in the run position.
2013 Black GT300I
Puig windshield
Dr. Pulley sliders
Denso Iridium plug
SHAD SH40 topcase

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
I'm guessing the main fuse is blown. The KILL switch will not affect the lights ect...
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

kbshaq

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Thanks for all the troubleshooting input.  It turns out that it was a dead battery.
It was caused by just leaving the key in the "off" (but not steering lock) position.  So, apparently, just leaving the key in there drains the battery??
I'm now using the Battery Tender Jr.,  it's my "friend" now.  :)

Now I need to know how to reset the clock on the dash .. I'll create a new thread.

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
If the key is off the power is off. The is a possibly you left your seat open and the met in light killed the battery.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

kbshaq

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
If the key is off the power is off. The is a possibly you left your seat open and the met in light killed the battery.

Bettin:  please say that again, as the seat was also something my dealer mentioned.  What did you mean by ".. the met in the light killed the battery."?

Thanks again!!

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Your under seat light, the one that comes on when the seat of open, will not turn off unless the seat is fully latched closed.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

An Error Has Occurred!

Call to undefined function split()