REMOVING THE FRONT BAODY COVER HELP

[ophelia]

Those are all the screw locations. Just take your time. Be careful with the big Y-shaped piece of plastic on the front of the bike. The plastic clips might snap if you don't pull straight out.

[mousejunks]

There is a super easy way, only takes 5 minutes:

1) remove the windscreen (4 allen bolts + 1 bolt under badge)
2) loosen 6 screws at the rear-side of the front section
3) pull the whole front section out by tilting it forward.

Do this if you need to change the front headlight bulbs, inidcator bulbs, 12V fuse or relays.

[kneeslider]

Please explain this in detail, i tried it and it didn't even budge.

There is a super easy way, only takes 5 minutes:

1) remove the windscreen (4 allen bolts + 1 bolt under badge)
2) loosen 6 screws at the rear-side of the front section
3) pull the whole front section out by tilting it forward.

Do this if you need to change the front headlight bulbs, inidcator bulbs, 12V fuse or relays.

[de dee]

Please explain this in detail, i tried it and it didn't even budge.

  there is two bolts under the Y piece that has to be removed,. and two screws under the fender