Author Topic: tach doesn't work  (Read 1003 times)

chaz35

  • Hero Member
  • *****
  • Posts: 711
  • old guy
    • View Profile
tach doesn't work
« on: November 13, 2014, 05:30:25 PM »
My tach needle is pegged to the right.  I took the plastic cover off and moved it back to zero.  It actually worked for a little while, but it's back to being maxed out again.  Is there something to check for that might be causing this or do I just need to replace it?  Thanks for any replies.  Cheers
1st and 2nd usually have an unfair advantage.  3rd is usually the best, can learn the most from.  paraphrased from Don Quixote, over 400 years ago, still true today

chaz35

  • Hero Member
  • *****
  • Posts: 711
  • old guy
    • View Profile
Re: tach doesn't work
« Reply #1 on: April 10, 2016, 03:45:19 PM »
update:  I bought new speedo assembly and unfortunately got in the wrong one (see for sale thread if interested in buying).  The problem was the speedometer cable connection, 2003 has an angled connection, I received the later version that has a straight connection.  I did connect all the wiring to test, and new tach worked properly all wired up.  So, at least I know I need a new tach that fits, it's not a wiring problem between the tach and engine.  Cheers
1st and 2nd usually have an unfair advantage.  3rd is usually the best, can learn the most from.  paraphrased from Don Quixote, over 400 years ago, still true today

paceneedsstides

  • Hero Member
  • *****
  • Posts: 653
  • Cuz I can't drive...55!!...No I mean that I try...
    • View Profile
Re: tach doesn't work
« Reply #2 on: April 13, 2016, 10:28:34 PM »
Like 50 doesn't have tach so can't help you there I installed a digital aftermarket one.
2013 Kymco/Malossi Like 70 2T
Technigas Next R Chrome exhaust
Malossi Dellorto 19mm Carb
94 main jet
Malossi Multivar
Dr Pulley 6gr Sliders
Malossi Blue Rear Pulley Spring
Malossi Torsion controller
Stage 6 Sport Pro Clutch
Stage 6 upgear kit
Malossi PHBG Open Racing Filter Chrome Covered

Triesandluth

  • Hero Member
  • *****
  • Posts: 813
  • Getting it, a mile per hour at a time
    • View Profile
Re: tach doesn't work
« Reply #3 on: April 21, 2016, 07:20:09 PM »
Good to know!

Sent from my VS985 4G using Tapatalk

Almost...at...speed...limit... Aww, brake lights..

An Error Has Occurred!

Call to undefined function split()