« previous next »
Pages: [1]

Author Topic: Loose bolts on new machines  (Read 1291 times)

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Loose bolts on new machines
« on: May 20, 2016, 05:16:46 PM »
This topic has been well addressed on this forum but here it is again for emphasis! Get the blue Loctite and put it on the muffler heat shields' bolts! Now! New DT300i bolts barely over finger tight. Holds even with the heat.

Karl
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

TroutBum

  • Hero Member
  • *****
  • Posts: 1211
  • 2012 Like 200i (sold)
    • View Profile
Re: Loose bolts on new machines
« Reply #1 on: May 20, 2016, 05:24:34 PM »
Gotta love that the blue loctite. Every service I check as many fastners as possible for loose.
Logged

MJR

  • Hero Member
  • *****
  • Posts: 1141
    • View Profile
Re: Loose bolts on new machines
« Reply #2 on: May 20, 2016, 05:36:10 PM »
If they are cross threaded no loctite required. One of the handle bar cover screws was on my new scoot.
Logged
'03 Clipper Yellow Honda Reflex
'03 Coast Cyan Atlantic 500
'14 White MyRoad 700i
'09 Mirage White Burgman 650
'06 Oort Gray Burgman 650 project
'05 Sonic Silver Burgman 650 project
'03 Space Blue Burgman 650, rebuilt/upgraded CVT w/Polish adapter
'03 Space Blue Burgman 650 parts bike

wkreps

  • Hero Member
  • *****
  • Posts: 831
    • View Profile
Re: Loose bolts on new machines
« Reply #3 on: May 20, 2016, 05:46:52 PM »
I didn't know that the Blue LocTite would hold those muffler shields (because of the heat). Thanks.
Logged
Wayne


CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Loose bolts on new machines
« Reply #4 on: May 20, 2016, 06:55:26 PM »
Use red if blue won't hold it!

Karl
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

MJR

  • Hero Member
  • *****
  • Posts: 1141
    • View Profile
Re: Loose bolts on new machines
« Reply #5 on: May 20, 2016, 07:19:19 PM »
Quote from: CROSSBOLT on May 20, 2016, 06:55:26 PM
Use red if blue won't hold it!

If you absolutely never need to remove it, lol.
Logged
'03 Clipper Yellow Honda Reflex
'03 Coast Cyan Atlantic 500
'14 White MyRoad 700i
'09 Mirage White Burgman 650
'06 Oort Gray Burgman 650 project
'05 Sonic Silver Burgman 650 project
'03 Space Blue Burgman 650, rebuilt/upgraded CVT w/Polish adapter
'03 Space Blue Burgman 650 parts bike

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14693
  • Rural Ohio
    • View Profile
Re: Loose bolts on new machines
« Reply #6 on: May 20, 2016, 07:47:09 PM »
If it's gone, switch from blue to red.
 :)
Stig

drinking Old Turkey like Troutbum.
Early on I bought a several pound box of hardware & hoses stripped from a LIKE200i.
Have used 1 or 2 so far.
Most of the fasteners on my scoot have been so blasted tight I had to buy the correct tool to remove them!
« Last Edit: May 20, 2016, 07:50:23 PM by Stig »
Logged
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

2wheelfun

  • Hero Member
  • *****
  • Posts: 710
    • View Profile
Re: Loose bolts on new machines
« Reply #7 on: May 23, 2016, 11:28:51 PM »
Anything with 2 wheels is gonna have loose bolts after miles n miles of fun, capiche?
Logged

2wheelfun

  • Hero Member
  • *****
  • Posts: 710
    • View Profile
Re: Loose bolts on new machines
« Reply #8 on: May 23, 2016, 11:32:57 PM »
OK new 2 wheel machines. It's been a problem ever since mini bikes were sold in the 60's. Especially lower at end price points.
Logged

An Error Has Occurred!

Call to undefined function split()
Back