Author Topic: K-Pipe Replacement Head light Bulb That’s LED  (Read 1434 times)

Load97

  • Newbie
  • *
  • Posts: 19
    • View Profile
K-Pipe Replacement Head light Bulb That’s LED
« on: June 16, 2019, 04:15:11 PM »
I’m trying to figure out the bulb that’s in the headlight. If anyone knows please post. If someone has a decent bulb part number that’s LED that will work as well. I didn’t see anything listed in the manual, but maybe I missed it.
2017 Kymco K-Pipe 125

Load97

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: K-Pipe Replacement Head light Bulb That’s LED
« Reply #1 on: June 17, 2019, 02:48:03 PM »
DZG H4 Car Motorcycle LED Headlight Bulbs 9003 HB2 P43t HS1 6500K CREE Chips High Low Beam Lights Conversion Kit 2 Yr Warranty-2 Pack https://www.amazon.com/dp/B07BTW6RCG/ref=cm_sw_r_cp_api_i_dF6bDbSWJX579

I ordered up this one last night. I’ll give it a try. Guess the bulb is n HS1. I never heard of it before, but I don’t screw around with small bikes until now and once in the early 90’s.
2017 Kymco K-Pipe 125

monkeybongos

  • Sr. Member
  • ****
  • Posts: 267
  • Tampa, Fl
    • View Profile
Re: K-Pipe Replacement Head light Bulb That’s LED
« Reply #2 on: June 17, 2019, 05:00:08 PM »
Interested if it works without messing up the battery or electric system.
Would love to have a bright LED bulb.
2014 BV 350  "IndiGO" (fast, strong and tireless)
2006 Honda Rebel 250  "Snow Leopard" (stealthy, agile and durable)
2018 Lance Cali Classic 200i  "Black Panther" (smooth, nimble, quiet and quick)
2016 Wolf V-50 (sold)

Wanted a Kymco, ended up w a Lance, but that forum is inactive, so I am here

Load97

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: K-Pipe Replacement Head light Bulb That’s LED
« Reply #3 on: June 18, 2019, 03:15:23 AM »
I’ll post if it does.
2017 Kymco K-Pipe 125

Load97

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: K-Pipe Replacement Head light Bulb That’s LED
« Reply #4 on: June 19, 2019, 11:37:48 AM »
The DZG H4/HS1 bulb only worked for the high beam. The low beam is an H8, which I didn't have. So I ordered one up last night that should be here Thursday. I did plug in the H4 bulb and then turned the key on. It worked. I then fired the bike up and let it idle and rev it a bit and the bulb didn't flicker in the 3-4 minutes I was doing it.
2017 Kymco K-Pipe 125

Load97

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: K-Pipe Replacement Head light Bulb That’s LED
« Reply #5 on: June 22, 2019, 03:07:52 AM »
BEAMTECH H11 LED Headlight Bulb, 50W 6500K 8000Lumens Extremely Brigh H8 H9 CSP Chips Conversion Kit https://www.amazon.com/dp/B06XHDYTGL/ref=cm_sw_r_cp_tai_7OzdDb40Q2RQ2

Used this for the low beam. I had to move the wiring harness over a little bit. Tight fit, but all went well. I do need to see if I can “clock” the bulb as the leds are up and down facing and probably should go from left to right. Did not get a chance to see the bulbs at night though.

The high beam bulb from the above post I had to use a uni-bit to open up the whole for the bulb to go through. Not a big deal at all.

So far with idling and a short ride no issues with the bulbs cutting out. The high beam light does make the lens feel warm though, but I’m thinking it should be good.
2017 Kymco K-Pipe 125

Load97

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: K-Pipe Replacement Head light Bulb That’s LED
« Reply #6 on: June 23, 2019, 02:59:10 AM »
Bike really needs a different reflector housing. Checked the lighting tonight. Pretty sporadic but a bit better than the halogen. The Sachs madass has projectors, and I wonder if one could retrofit that on.
2017 Kymco K-Pipe 125

An Error Has Occurred!

Call to undefined function split()