Author Topic: What's a good reading for a battery at rest?  (Read 360 times)

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14398
  • Rural Ohio
    • View Profile
What's a good reading for a battery at rest?
« on: September 08, 2019, 08:47:54 PM »
Meter connected to a battery in a scooter with the key off?
Or, doesn't that tell much of anything about the battery's health?

Getting 12.87 on my LIKE's 14Ah battery....using the battery tender plug-end.
Have an old YUASA on the shelf - get 12.46 on it.

Stig


« Last Edit: September 08, 2019, 08:50:00 PM by Stig »
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

David E

  • Full Member
  • ***
  • Posts: 103
    • View Profile
Re: What's a good reading for a battery at rest?
« Reply #1 on: September 08, 2019, 09:29:25 PM »
That reading is good at rest but you’ll need a true battery tester to see what the CCA is at rest.  I literally just did the exact same thing to one of our cruisers today.    Battery reads CCA is suppose to be 750 and with the vehicle off it tested at 350.   So time for a new battery. 


Sent from my iPhone using Tapatalk

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14398
  • Rural Ohio
    • View Profile
Re: What's a good reading for a battery at rest?
« Reply #2 on: September 08, 2019, 11:42:39 PM »
That reading is good at rest but you’ll need a true battery tester to see what the CCA is at rest.  I literally just did the exact same thing to one of our cruisers today.    Battery reads CCA is suppose to be 750 and with the vehicle off it tested at 350.   So time for a new battery. 


Sent from my iPhone using Tapatalk
Could you recommend a good (enough) CCA tester for home use...under $50?
Would be handy for our cars and scoots,  with winter coming on.
Thanks, Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7735
  • West Tennessee, USA
    • View Profile
Re: What's a good reading for a battery at rest?
« Reply #3 on: September 09, 2019, 12:08:17 AM »
2.1 volts per cell no load X 6 = 12.6 volts no load. Nominal, up down a little OK. David E.has a good point and Harbor Freight should have a good load tester in your price range. Anything that draws at ten amps should work if it has a decent volt meter on it.
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

An Error Has Occurred!

Call to undefined function split()