Author Topic: HELP!  (Read 587 times)

ccemn1

  • Newbie
  • *
  • Posts: 49
    • View Profile
HELP!
« on: November 27, 2019, 01:30:17 PM »
I have a 2018 Kymco Cross Town 300. I didn't like the grips, they were too hard and smooth for a good grip. I bought new grips, and replaced the left side first.
When I went to replace the throttle side, I discovered that it's impossible to remove, and must have been fabricated, or cast as a single piece with the throttle tube? I now have the throttle so butchered from trying to remove it, it's likely I'll have to replace the throttle tube itself, before putting the new, matching grip on.
Can anyone tell me which, and where I might purchase a throttle tube that would be compatible?
Love this bike, but it's got a few eccentricities like this, that drive me crazy.
Thanks in advance for your time.

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14675
  • Rural Ohio
    • View Profile
Re: HELP!
« Reply #1 on: November 27, 2019, 09:07:03 PM »
See sticky at top of General page, for Kymco parts.
Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

john grinsel

  • Hero Member
  • *****
  • Posts: 1044
    • View Profile
Re: HELP!
« Reply #2 on: November 27, 2019, 09:59:00 PM »
Yes Kymco throttle grip is one piece----try sponge over grips, work for me.   Last  up to 50,000 miles.

ccemn1

  • Newbie
  • *
  • Posts: 49
    • View Profile
Re: HELP!
« Reply #3 on: November 28, 2019, 01:23:00 PM »
Thanks guys, but I just took the whole thing apart, and ordered a universal push/pull replacement throttle tube. It was frustrating because I already had the left side aftermarket grip on & glued.
thanks again.

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14675
  • Rural Ohio
    • View Profile
Re: HELP!
« Reply #4 on: November 28, 2019, 06:27:00 PM »
Thanks guys, but I just took the whole thing apart, and ordered a universal push/pull replacement throttle tube. It was frustrating because I already had the left side aftermarket grip on & glued.
thanks again.
No, no....always start with the hard part first! :)
Hope you get it sussed!

Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

An Error Has Occurred!

Call to undefined function split()