Quick reference list of Like 200i light bulbs

[Duddy03]

Has anyone attempted to compile a list of the common names for the various types of bulbs used in the factory Like 200i?  My Cyclepedia Service Manual lists bulbs such as "Winker 12V 10W" or a "License light 12V 5W."  It would be great to know that the stock directional signal bulb is a GE # 11609 or a license plate light is a # 194.  The KYMCO dealer suggests  the "remove and compare" method.  Maybe I'm getting lazy in my old age but perhaps one of your have taken your own notes at one time or another.  Thanks.

[Stig / Major Tom]

I just use the owner's manual.  My LIKE200ILX  is only 8 yrs old, so haven't needed to replace a bulb yet.😊
Stig

[Duddy03]

Stig. 
Thanks for your reply.  I haven't checked out my Owner's Manual for a long time.  But this is what mine says:
Tail/brake light      12v 35/35W
Turn signal light    12 v 10W X 4

OK.  You didn't take the "bate."  I'll have to use use a  more direct approach.  This forum has been discussing replacement of standard bulbs with LEDs for years!  From what I read, the potential issue is that many LEDs are not engineered to withstand the heat build up; they have no heat sink.  Another issue is that the LED may not fit in the enclosure space.

Also, I still have nightmares recalling the rechargeable batteries I bought for my walkie-talkies which are sitting on the shelf because I bought the wrong stock number from eBay!  I am waiting for someone to confirm for me that the tail light, for example, is a # 1157, dual filament, bayonet mount.  The nomenclature from KYMCO doesn't provide any useful information since all the bulbs used are 12 VDC and the wattage used will be much lower if LEDs are purchased as a replacement.

Finally. I have to confess , Phase 2 of this thread would lead us into developing a second column for the bulb listing.  That is, what LED bulbs have others bought which they would rate "good" or "very good" for brightness and reliability.  Now, everyone knows what keeps me from sleeping at night and just how lazy I truly am.

[Stig / Major Tom]

I'll add this:
Couple yrs ago I  tried leds in the front running lights. They started blinking - signaling a turn for me!
Whipped them out and replaced the stock 3W acorn? (, bayonet?)  bulbs with 5W amber bulbs. They are very bright and are very noticeable on the road. I look like an HD coming. ( those bulbs are hellishly hard to replace....if you have Easter Ham sized hands, like mine. Best bet is to bribe an intelligent toddler to do it for you)
Stig

[Duddy03]

My grandkids are super at small parts like Legos (until they fall between the cracks in the floorboards) in London.  I'll put them on notice.  Thanks for reminding me that I don't need to do anything right now.  I like that!  Now if we could get rid of some of this wind, rain and cold temps, we could go for a scooter ride.  PS.  The word is "bait" not "bate."

[Stig / Major Tom]

Imagined you were going for, de-'bate'.
I'll do best coffee, best donuts, best Honda Forza color - debates.
But I won't be drawn into 'bates' on bulbs or oils😊

Have a good one....
Stig

[Duddy03]

You have no idea what this means when I used the word, "bate?"  As a previous technical writer, on all of my notes from this forum's postings, I have corrected everyone's misspelled words and poor grammar.  Many red pencils were consumed as I made your comments ready for the publisher.  Now because of my own error, the slate scores have been erased and you all pass your written communication skills test!

I have learned a lot about my KYMCO because of this forum.  Thanks!  And in order to make sure you have no sleepless nights, for you, Stig, I refuse to tell you how many miles I put on my Like 200i with Amsoil 100% Synthetic Scooter Motor Oil before changing the oil.  My lips are sealed, forever.

[Stig / Major Tom]

You have no idea what this means when I used the word, "bate?"  As a previous technical writer, on all of my notes from this forum's postings, I have corrected everyone's misspelled words and poor grammar.  Many red pencils were consumed as I made your comments ready for the publisher.  Now because of my own error, the slate scores have been erased and you all pass your written communication skills test!

I have learned a lot about my KYMCO because of this forum.  Thanks!  And in order to make sure you have no sleepless nights, for you, Stig, I refuse to tell you how many miles I put on my Like 200i with Amsoil 100% Synthetic Scooter Motor Oil before changing the oil.  My lips are sealed, forever.

Well, that explains why your avatar reminds me of the high school English teacher who force-fed me Great Expectations (I would have quit reading for life but for discovering Holden Caulfield.)
And, if you're going to neglect your scooter's circulatory system - you couldn't have chosen better than Amsoil. (my salesman handed me two bottles of Amsoil 'scooter' specific oil)

Be well, and do good work.....
Stig