Author Topic: Noisy belt!  (Read 2632 times)

YagerMeister

  • Newbie
  • *
  • Posts: 28
    • View Profile
Noisy belt!
« on: September 12, 2010, 08:34:47 PM »
I've been riding scooters since 2006, and prior to my Yager I've owner a Yamaha Vino 125 and a Kawasaki Ninja 500R... I also have a Yamaha Morphous that I got in 2007.  Neither of the Yammies had noisy belts like the Yager.  My Yager's belt (or should I say, the belt/transmission housing area) makes a noticable (but not *extremely* loud) WOOOOOOOooooooooh when I back off the throttle from say, 45mph (~6k rpm) and begin to brake to a stop.  At first I thought it might be the rear brake dragging or tire noise, but I had someone help me and I put the bike on the center stand and revved it up to 5 grand then closed the throttle, and sure enough, a WOOOOOOooooooh type whirring sound came from inside where the belt goes.  Is this normal for a Kymco, or do I need to have the thing looked at?  I have about 450 miles on it so far and I have done all the break-in services per the manual, including changing the transmission oil.

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: Noisy belt!
« Reply #1 on: September 12, 2010, 09:11:08 PM »
I've been riding scooters since 2006, and prior to my Yager I've owner a Yamaha Vino 125 and a Kawasaki Ninja 500R... I also have a Yamaha Morphous that I got in 2007.  Neither of the Yammies had noisy belts like the Yager.  My Yager's belt (or should I say, the belt/transmission housing area) makes a noticable (but not *extremely* loud) WOOOOOOOooooooooh when I back off the throttle from say, 45mph (~6k rpm) and begin to brake to a stop.  At first I thought it might be the rear brake dragging or tire noise, but I had someone help me and I put the bike on the center stand and revved it up to 5 grand then closed the throttle, and sure enough, a WOOOOOOooooooh type whirring sound came from inside where the belt goes.  Is this normal for a Kymco, or do I need to have the thing looked at?  I have about 450 miles on it so far and I have done all the break-in services per the manual, including changing the transmission oil.

A125 behaved in similar manner when it was new, you could literally HEAR the belt when backing off the throttle. With time it stopped.
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

Hoolander2

  • Hero Member
  • *****
  • Posts: 1180
    • View Profile
Re: Noisy belt!
« Reply #2 on: September 13, 2010, 01:25:43 AM »
My Xciting 500 does it very loudly when letting off.  Has for all the 4000 miles I've had it now.  That doesn't mean it's normal though. I don't know.   ;D

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Noisy belt!
« Reply #3 on: September 18, 2010, 02:17:40 AM »
..my kymcos have "whirred" since day one...


..every mod (action) necessitates a (reaction) mod..

ScooterWolf

  • Hero Member
  • *****
  • Posts: 1171
    • View Profile
Re: Noisy belt!
« Reply #4 on: September 18, 2010, 02:54:26 PM »
For me I'm starting to hear a rubbing sound from my front wheel. I think it's the disk brake/pad. Anyone know if this is common?

-Wolf

YagerMeister

  • Newbie
  • *
  • Posts: 28
    • View Profile
Re: Noisy belt!
« Reply #5 on: September 20, 2010, 08:14:42 PM »
Yeah, I've noticed that, too (about the brake).  The pads seem to be kind of rough, but also I've noticed the caliper will "wiggle" if you grab it, which seems odd.  My Yamaha's is perfectly tight.  Haven't had time to check the bolts.

Yager200i

  • Sr. Member
  • ****
  • Posts: 385
    • View Profile
Re: Noisy belt!
« Reply #6 on: February 18, 2011, 06:03:42 AM »
My old scooter did that with a new belt, but it subsided after the belt had worn-in a bit (if you're running a Kevlar belt, it might take a couple thousand miles for it to subside).

Oddly enough, for a long road-trip once, we rented a Jeep Liberty that had the CVT transmission, and it made the exact same noise!
« Last Edit: February 18, 2011, 06:28:01 AM by Yager200i »

An Error Has Occurred!

Call to undefined function split()