Kymco Yager 200 Roller spec's

[de dee]

yager 200 the variator pulley is 5 1/16 "  the downtown 300 variator is  5 13/ 16 " this is the diameter of each pulley

[Louder North]

Best thing you can do for a Yager. Get one of these:
https://scooterpartsco.com/kymco/kymco-yager-200/malossi-variator-for-kymco-and-sym-scooters?zenid=e345232f79d5076a72cd1c216f5754e9
Comes with 2 sets of rollers 9.5 and 13.5 gr., both are way too light for normal street riding. I ordered 17 gr. which for me were just right. I've tested both stock and 3 different weight Malossi's on my secret dyno test facility. Acceleration numbers for 1/8th mile are:
stock ......13.14 sec. @ 6412 rpm
Malossi W/9.5 gr.....12.20 @ 8740
            W/13.5 gr......12.26 @ 7921
            W/17 gr. .....12.63 @ 7243
The Malossi with 17gr. rollers yields a solid 1/2 second improvement in 1/8th mile times.
Stock rollers are a odd size, 20.8 dia x 15 wide at 17.5 gr. 

Thanks.  Good advice.  I just installed the Malossi multivar, belt and clutch. In the variator I used a combination of the two roller weights as, according to the leaflet that came with the variator, a 175 cc scoot falls in between their recommendations for the 9.5 gm and 13.5 gm rollers.  See photo attached.