« previous next »
Pages: [1]

Author Topic: People 150 Speedometer issue I'm Stumped  (Read 2694 times)

38a;

  • Newbie
  • *
  • Posts: 4
    • View Profile
People 150 Speedometer issue I'm Stumped
« on: September 09, 2022, 01:53:02 PM »
Just picked up a 2006 people 150 for 100 bucks.(4700 miles) Got it running great but speedometer doesn't work and odometer does. Disconnected cable from wheel and put cordless drill in reverse and speedo works smoothly. Screw on cable and nothing. Cable end is not broken and stuck in sensor. So what else? Bad Sensor?
Logged

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: People 150 Speedometer issue I'm Stumped
« Reply #1 on: September 09, 2022, 04:47:40 PM »
Cable too short...
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Iahawk

  • Hero Member
  • *****
  • Posts: 2637
  • Eastern Iowa, USA
    • View Profile
Re: People 150 Speedometer issue I'm Stumped
« Reply #2 on: September 09, 2022, 04:50:17 PM »
the cable is spun by a gear where it attaches to the front wheel. I think it's plastic and its possible that it got chewed up? Pull it apart to take a look.
Logged
2010 People S200 - sold after 8 wonderful years!
2014 Ninja 300
1996 Honda Helix
1984 Honda Nighthawk 650

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14690
  • Rural Ohio
    • View Profile
Re: People 150 Speedometer issue I'm Stumped
« Reply #3 on: September 09, 2022, 09:45:26 PM »
Tony Soprano would say, "you gotta a great'a running scoooter for 100 bucks. Quit whining!"
🙃

Stig
My $ is with Hawk. I think it's down there at the wheel...not in the dashboard.
« Last Edit: September 10, 2022, 11:17:33 AM by Stig / Major Tom »
Logged
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

Ruffus

  • Hero Member
  • *****
  • Posts: 1742
    • View Profile
Re: People 150 Speedometer issue I'm Stumped
« Reply #4 on: September 10, 2022, 10:29:54 AM »
@38a;
your instrument unit consists of several "gear-like" items (depends on model)(some have resistors), one of them, most probably its speedo-gear is misaligned or broken.
Remedy:
-carefully dismantling and align gears/sprockets again
-measure with multimeter
-replace the whole unit with a used one.
« Last Edit: September 10, 2022, 10:34:23 AM by Ruffus »
Logged
Happy and safe scootering, Ruffus

An Error Has Occurred!

Call to undefined function split()
Back