KymcoForum.com
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Welcome Kymco Owners!
Home
Help
Search
Login
Register
KymcoForum.com
»
Scooters - 125 to 300
»
People 250
»
Radiator Fan delay... engine overheats
« previous
next »
Print
Pages: [
1
]
Author
Topic: Radiator Fan delay... engine overheats (Read 1432 times)
PickleB21
Newbie
Posts: 2
Radiator Fan delay... engine overheats
«
on:
July 20, 2012, 01:08:19 AM »
Had this People S250 for three years, very low mileage approx. 1000 miles. For the first time it overheated on me , discovered the radiator cooling fan did not function.
Once stopped and turned engine off, (Was overheated) Turned engine back on and the fan kicked on.
Any ideas as to what might have impede the fan from turning on when it should have?
What do I need to check to prevent this from happening again? Has this happened to anyone? Any advise will be welcome,Thank you...
Logged
zombie
You never know do ya!
Hero Member
Posts: 13870
Close enough to get the idea!
Re: Radiator Fan delay... engine overheats
«
Reply #1 on:
July 20, 2012, 02:45:16 AM »
Alot of things can cause this. Coolant level... If it's low the sender cannot read the temp. Wiring... Explains itself. Sender is going bad... attach a test light to the sender to see if the sender is reading. While you ride it should come on. This will let you know if the sender is good. Fan relay... It is most likely the relay is going, and I would replace it asap.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken." Bobby Sands...
PickleB21
Newbie
Posts: 2
Re: Radiator Fan delay... engine overheats
«
Reply #2 on:
July 21, 2012, 11:42:20 PM »
Thank you Zombie, will do those checks ASAP, Coolant level was good, Had washed the Bike the day prior, probably got some water on the relay or something, will pay a close look.
Thank you , you are most kind.
Logged
An Error Has Occurred!
Call to undefined function split()
Back