Thought I'd show you all what it looks like to have a Bestem top case on the Downtown.
To mount the SR92M base plate you need to remove the standard bolts. I first was not sure how to do it, and asked the mechanic at the dealer.
Push the plugs towards the centre and you'll be able to stick in a screwdriver or other pick and they pop right out.
The Bestem base needed a little modification by providing new mounting holes.
Thus I ended up painting the whole base in a matching colour to the grab bar.
(Forgot what the colour is that I used (Nissan...), but it's a little lighter then original, GM Pewter might be a better match.)
Used Aluminium duct tape to replace the paper backing.
Wiring up the LED lights was the next chore:
I did not wanted to have a loose cable on either the case nor the scooter, thus used two 3.5 mm stereo plugs on both ends to connect.
Now the cable can be removed, when not in use.
And this is the end result:
Lights on:
Brake on:
Have Fun
