« previous next »
Pages: [1]

Author Topic: measuring variator rollers  (Read 1376 times)

mrmike

  • Hero Member
  • *****
  • Posts: 748
  • Syuracuse, NY
    • View Profile
measuring variator rollers
« on: July 23, 2012, 11:47:05 AM »
I have a 2010 Kymco people 150. I want a little more performance out of it, so I'm goint to install lighter rollers and a 1000lb clutch spring. I want to take it apart today and see what my stock rollers are. I have a postal scale to weigh them, but I don't know what measurements I need. How do I measure to ensure I order the correct rollers?
Logged
Blue '23 People S 150i ABS  Moto Discovery GPS bar, Shad SH33 top case, Iridium spark plug, Black reflective graphics, Battery Tender ring terminal cable, LED tag light.         
Past rides- '73 Honda 450, '00 Harley Softail Deuce, '10 Kymco People 150, '12 Kymco GTI 300, '21 Kymco X-Town 300i ABS

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: measuring variator rollers
« Reply #1 on: July 23, 2012, 09:40:24 PM »
..weight is in grams..

..can also measure diameter and width in mm to get the correct deminsions for your scoot..


..i think your oems are 15 grams and 18 X 14 mm....
« Last Edit: July 23, 2012, 09:48:41 PM by wordslinger »
Logged
..every mod (action) necessitates a (reaction) mod..

Calothrix

  • Sr. Member
  • ****
  • Posts: 341
    • View Profile
Re: measuring variator rollers
« Reply #2 on: July 24, 2012, 01:50:28 AM »
The OEM rollers in my 2005 People 150 are 18 mm x 14 mm x 15 g.  FYI, if you're considering going with Dr. Pulley sliders, I replaced my OEM rollers with 13 g sliders and they performed very similar.  So, if you're considering using sliders and you're looking for more low end acceleration, go with less than 13 g.
Logged

An Error Has Occurred!

Call to undefined function split()
Back