Author Topic: Newbie looking at a 2000 sc10as ZX50  (Read 1788 times)

GTP

  • Newbie
  • *
  • Posts: 1
    • View Profile
Newbie looking at a 2000 sc10as ZX50
« on: August 03, 2009, 04:54:56 PM »
Hello all. I am looking at a model year 2000 sc10as Zx50.  Can anyone give me the scoop on performance issues with this model and performance parts (same as other ZX50s?) and a good supplier?  Moped Hospital?  Thanks all.


OtoHNS

  • Newbie
  • *
  • Posts: 12
    • View Profile
Re: Newbie looking at a 2000 sc10as ZX50
« Reply #1 on: August 04, 2009, 02:06:50 AM »
There are little bits of information here and there on the internet, but not much.

I just recently bought a used ZX and am right in the middle of making upgrades.
I've purchased most of my upgrades from e-bay, although I did just recently (today) buy a drive belt from Mopedhospital.com.

Shaka

  • Hero Member
  • *****
  • Posts: 1660
    • View Profile
Re: Newbie looking at a 2000 sc10as ZX50
« Reply #2 on: August 04, 2009, 03:30:44 AM »
I believe that all of the zx50's are the same.  You can get parts for them pretty easily.  I have gotten mine locally from the dealer, moped hospital, and provoscooter.com.  As for issues, I haven't had too many.  I have replaced the voltage regulator twice.  Other than that, just normal maintanance.  Keep an eye on the oil pump, I have heard of those going.   Mine started leaking a bit.  I have done a lot of upgrading at this point so I just disconnected it and run premix to be safe.  I have heard of a lot of CDI issues, but I have not had any.  I am still running my stock (deresricted) one with over 12000 kms.  I thought it was bad, turned out to be the voltage regulator though.  All around I love it!

An Error Has Occurred!

Call to undefined function split()