Author Topic: New here, need help - Carburetor/AutoBystarter - Agility 125.  (Read 1826 times)

wrxdonkey

  • Newbie
  • *
  • Posts: 11
    • View Profile
Any help is appreciated, and I'd like to get some insight before I have to head home from work today so I can try to get her running this afternoon.

It was starting just fine and dying withing 5-10 seconds. I figured the carb needed a cleaning. It sat up for about 2 months and then this started, but I ran it once a week at idle in the drive way for about 15-20 minutes.

#1) I think I have bad gas - How do I drain it?

#2) I cleaned the carb last night, but the autobystarter won't go back into the carb properly, in spite of my best efforts. Is there a lubricant that is safe to use to get it back in there?

--I am assuming it (the auto bystarter) isn't properly seated because the scooter won't run at all and gets no power now (I only removed and replaced the carb, and that is the only electrical component that I touched.

3) I have no idea wtf to do, I have the service manual for the agility 125, but it's rather cryptic in its approach for someone new to maintenance on motorcycles such as myself.


wrxdonkey

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: New here, need help - Carburetor/AutoBystarter - Agility 125.
« Reply #1 on: June 19, 2009, 11:17:01 PM »
Not to bump my own thread, but it's fixed.

Here's how: I'm an idiot and after I did everything, I attempted to start the bike without the key in the ignition. This, of course didn't dawn on me until about 14 hours after, while I was at work pondering what the hell could be wrong. As soon as I got home, stuck the key in, and she fired right up.

Never felt so good yet so stupid at the same time, hahah.

An Error Has Occurred!

Call to undefined function split()