« previous next »
Pages: [1]

Author Topic: Fitted a power cable for my GPS  (Read 534 times)

PaulF

  • Hero Member
  • *****
  • Posts: 613
    • View Profile
Fitted a power cable for my GPS
« on: April 19, 2018, 10:35:25 AM »
What a pain in the rear end, removing panels and trying not to break clips just to get to the front so I could feed the power cable from the mirror to the battery.  Motorcycle mechanics must hate working on scooters.  At least now it is done and working well. 
Logged

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14695
  • Rural Ohio
    • View Profile
Re: Fitted a power cable for my GPS
« Reply #1 on: April 19, 2018, 10:48:29 AM »
Good job. Nice.
Now please tell me about fitting the Vespa mirrors to your LIKE.
It has been years since I fitted my Italian FAR mirrors to my LIKE. The Kymco mirrors have a smooth, non-threaded tip....while the Vespa mirrors are threaded 8mm....and reversed on my left Liberty mirror.
So, what steps did you take?
Is there less vibration from the thicker (stems) Vespa mirrors?

Thanks, Stig
Logged
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

PaulF

  • Hero Member
  • *****
  • Posts: 613
    • View Profile
Re: Fitted a power cable for my GPS
« Reply #2 on: April 19, 2018, 07:56:16 PM »
I just unscrewed the Kymco mirrors and screwed in the Vespa mirrors with no problems at all.  The Vespa mirrors sit wider so you get to see more road and less of your own body plus they have higher quality glass in the mirrors so the view is better.  I have not noticed any vibration.  The only bad point with the Vespa mirrors is that there is hardly any left to right adjustment in the mirror head so you need to set the view right when fitting them.
Logged

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7765
  • West Tennessee, USA
    • View Profile
Re: Fitted a power cable for my GPS
« Reply #3 on: April 19, 2018, 10:10:17 PM »
Nice job, PaulF! Plastic panels WILL make you think bad words!
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

PaulF

  • Hero Member
  • *****
  • Posts: 613
    • View Profile
Re: Fitted a power cable for my GPS
« Reply #4 on: April 19, 2018, 10:20:02 PM »
They certainly did Carl but now that I have done it once it will be so much easier next time.  Just wish that they had full panel removing instructions available.  I was glad to use some of Stig's photos for my headlight and taillight replacement because without them it would have been very hard.
Logged

TroutBum

  • Hero Member
  • *****
  • Posts: 1211
  • 2012 Like 200i (sold)
    • View Profile
Re: Fitted a power cable for my GPS
« Reply #5 on: April 20, 2018, 12:36:07 AM »
How are you listening to the turn-by-turn direction? BT communicator?
Logged

PaulF

  • Hero Member
  • *****
  • Posts: 613
    • View Profile
Re: Fitted a power cable for my GPS
« Reply #6 on: April 20, 2018, 03:06:03 AM »
I have the gps connected to my phone and the headset I use is the Sena 3S-W.  I have my music loaded onto the Garmin gps so I can have songs going softly in the background as I ride.  With the headset I can also just use my phone with that as well.  I like using the gps because I can plot a bit of a fun ride with it.

https://www.mrmobile.net.au/sena-3s-w-bluetooth-intercom-headset-with-wired-mi
Logged

An Error Has Occurred!

Call to undefined function split()
Back