« previous next »
Pages: [1]

Author Topic: what's the stock compression ratio  (Read 2910 times)

phatboy

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
what's the stock compression ratio
« on: May 14, 2013, 11:37:15 PM »
Hey, can't seem to find this information, all pages say N/A

I want to install a BBK and would prefer keeping it close to stock compression to avoid burning pistons or having to use special high octane gas (best pump gas here is 91).

I see a few different kits available, one appears to have a flat top piston and stock head, says "raises" it to 9:1 compression. Like this one: http://enviromoto.ecrater.com/p/3369520/ncy-72cc-big-bore-kit-fo

So that means it's lower than 9:1?
Logged
Agility 50 w/72cc BBK, A9 cam, stock airbox and exhaust (both drilled out), remove air tube restriction, stock head, stock carb, 105 main jet, CDI cut, smooth variator boss, stock variator w/5g rollers

Vivo

  • Hero Member
  • *****
  • Posts: 4980
    • View Profile
Re: what's the stock compression ratio
« Reply #1 on: May 15, 2013, 01:51:46 AM »
The Kymco website states the compression ratio of Agility 50 is 11:1
Logged

baddi

  • Sr. Member
  • ****
  • Posts: 498
  • Top speed: 38 km/h and fuel economy: 50 km/l
    • View Profile
    • My project fuel injection gallery
Re: what's the stock compression ratio
« Reply #2 on: May 30, 2013, 11:19:24 AM »
It is a good idea to have a proper service manual. I recommend this: http://scootergrisen.dk/scooterhjemmeside/download/kymco_agility_servicemanual.pdf as it has alot of technical specifications. :D
Logged
First Kymco agility 50 (2008) 11.000+ km (dead)
Second kymco agility 50 (2010) 20.000+ km. Project Fuel Injection. Stolen.
Kymco K-pipe 125 (2014) 7400 km.

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: what's the stock compression ratio
« Reply #3 on: June 02, 2013, 01:32:51 PM »
my manual says its 11. The last time I hooked a cage up to it it read 125 on the gauge which I know is realy good I have seen some as high as 130 thats the best you can do. If you go under 110
you are looking at rebuilding you motor.
Logged

An Error Has Occurred!

Call to undefined function split()
Back