KYMCO LICENCE PLATE HOLDER---SMALL IN AMERICA

[de dee]

  I used a trailer Lic. plate bracket from canadian tire should be found at harbor freight,. 

[ScooterCommuter]

:shrug: I just drilled extra holes in the plate and bolted it right in.

[GLV55]

I had the same problem with my People 150 licence plate holder - way too small for an Idaho plate. Had to get a piece of flat metal and drill 2 sets of holes, one set to attach the metal to the holder, and another set for the licence plate itself. Took about 20 minutes, but problem solved.

[mnpugdog]

Minnesota plates fit on the DT just fine without the adapter

[terminalbeard]

Today I went by the dealer and he called Kymco about the license plate bracket.  Normally the part costs $6.95 but he is getting them for free under Kymco warranty program. So I will have one next week for free.

[terminalbeard]

Picked up the official Kymco US license tag adapter today. It is obviously a universal design flat heavy steel plate. It doe not allow enough room for washers and nuts between the rear fender and plate so special fasteners must be found. I returned this $6.95 part even though the dealer did not charge me for it. Don't bother with this part.