Author Topic: Oil change time please help!  (Read 1360 times)

brandonbosch

  • Newbie
  • *
  • Posts: 21
    • View Profile
Oil change time please help!
« on: November 11, 2013, 11:35:20 PM »
Hey! So this will be the first time i change the fluids myself on my new downtown. Where is ye drainplug? I didnt see that little gem shown in my owners manual. Also i assume that the little black cylinder housing under the dipstick is where the filter resides? Any help or tips would really be appreciated. Thanks!

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Oil change time please help!
« Reply #1 on: November 14, 2013, 09:04:40 PM »
The engine oil drain is the 17 mm bolt head on the left side of the engine case as rearward as you can get and still be engine case. The BLACK 17 mm "bolt head" just forward of the oil drain is the strainer screen made of plastic/composite. The filter is on the right side of the engine case, rearward and takes a 15/16" socket or the mm equivalent. Get your wrenches and get busy. Call me in the morning!

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

brandonbosch

  • Newbie
  • *
  • Posts: 21
    • View Profile
Re: Oil change time please help!
« Reply #2 on: November 15, 2013, 08:48:20 PM »
In regard to the black bolt forward of the drain plug, Is that screen something i would remove and clean out every oil change?

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Oil change time please help!
« Reply #3 on: November 15, 2013, 09:33:32 PM »
Remove and clean for the first couple of changes to see what you find. Stretch it out to every three changes if you find little to nothing. Use your judgement after you are confident there will be no trash in the screen. Change the filter EVERY oil change.

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

An Error Has Occurred!

Call to undefined function split()