Author Topic: Fuel additive  (Read 3355 times)

Boudroux

  • Newbie
  • *
  • Posts: 12
    • View Profile
Fuel additive
« on: January 25, 2014, 04:44:59 PM »
Do people use a fuel additive regularly and if so, how often and what type do you prefer?
Thank you ;D

ophelia

  • Sr. Member
  • ****
  • Posts: 394
    • View Profile
Re: Fuel additive
« Reply #1 on: January 25, 2014, 05:14:41 PM »
Is there anything that you want the additive to do for you that petroleum chemists cannot provide with their gasoline? :D

I personally use fuel stabilizer if I am going to store a bike for a month or longer. Some carburetors are difficult to get to, and I don't want pilot jets clogging up.
2011 Kymco Downtown 300i

MaryK

  • Sr. Member
  • ****
  • Posts: 498
    • View Profile
Re: Fuel additive
« Reply #2 on: January 25, 2014, 05:25:07 PM »
We use Sta-Bil fuel stabilizer (Red kind) in our gasoline for small engines...  most of the year except when we know we will use the fuel quickly.

Also, we use fuel system cleaners a couple of times a year: 
Usually Berrymans B12 or Techron.  sometimes SeaFoam if we get it on sale.
Seafoam also stabilizes gasoline so it gets used in the winter.

B12 is much cheaper than most and works well.
With a total of 8 carbs on 4 small engines, we try to keep them clean!

Scoot safely,


New Rider in 2010

2009 GrandVista 250

tortoise

  • Hero Member
  • *****
  • Posts: 558
    • View Profile
Re: Fuel additive
« Reply #3 on: January 25, 2014, 05:32:55 PM »
Research PEA (poly ether amine) . . Techron . . Gumout All-In-One.

Drain carb fuel bowl prior to long term storage to avoid vent port evaporation.

TroutBum

  • Hero Member
  • *****
  • Posts: 1211
  • 2012 Like 200i (sold)
    • View Profile
Re: Fuel additive
« Reply #4 on: January 25, 2014, 09:13:36 PM »
Fuel additives aren't really needed unless you store the scooter over winter. Top tier gas producer put a lot of additives into the mix so adding more is a waste. Overtime fuel will go bad, but that's after months of sitting around. In that case an additive should be used.

josephthediviner

  • Newbie
  • *
  • Posts: 48
    • View Profile
Re: Fuel additive
« Reply #5 on: January 26, 2014, 12:10:25 AM »
Before our state like so many others jumped on the Ethanol bandwagon I was ok with using any additive like Seafoam but since then, I have began to use (http://mystarbrite.com/startron/)  and I would like to try out the (http://www.amsoil.com/shop/by-product/fuel-additives/gasoline/quickshot/?code=AQSCN-EA0

   as far as I am aware there have been no fuel related issues with any of the treated equipment, lawnmower, scooters...
  The best additive is adding fuel on a regular basis by riding on a regular basis.     

AMAC1680

  • Hero Member
  • *****
  • Posts: 1076
  • Outdoorsman, Advocate, Paraplegic
    • View Profile
    • SEGS4VETS
Re: Fuel additive
« Reply #6 on: January 26, 2014, 09:48:19 AM »
Before our state like so many others jumped on the Ethanol bandwagon I was ok with using any additive like Seafoam but since then, I have began to use (http://mystarbrite.com/startron/)  and I would like to try out the (http://www.amsoil.com/shop/by-product/fuel-additives/gasoline/quickshot/?code=AQSCN-EA0

   as far as I am aware there have been no fuel related issues with any of the treated equipment, lawnmower, scooters...
  The best additive is adding fuel on a regular basis by riding on a regular basis.     

I've used Startron in my boats and never a storage issue.
I'm using Quickshot in the scoots and they also have not been an issue.

Be Big,
AMAC
www.SEGS4VETS.org
2017 Lance Cali Classic 200i
2013 SYM RV200
2013 Kymco Downtown 300
2010 Lance Cali Classic-sold
1973 VW Dune Buggy
1974 VW Meyers Manx

Porkie

  • Sr. Member
  • ****
  • Posts: 272
    • View Profile
Re: Fuel additive
« Reply #7 on: January 26, 2014, 02:48:25 PM »
Seafoam, Techron and Lucas fuel stabilizer.

I have a station that sells 91 octane, ethanol free and I use that in all of my bikes and the farm and yard equipment.

Sam:)
2014 Polaris Ranger 800 crew cab 4x4
2012 Honda Goldwing Blue
2013 Kymco Xciting RI ABS in gold/ orange
2005 Suzuki Burgman 650 blue metallic
KF6GUW Amateur Extra

MotoRandy123

  • Hero Member
  • *****
  • Posts: 978
  • Lets Ride!
    • View Profile
Re: Fuel additive
« Reply #8 on: January 26, 2014, 03:32:52 PM »
  Techron used to be good until they took the PEA out of it. Anything that works good is
probably being phased out as California has found out it causes cancer...

  I have to wonder what Startron does as they say how good it is but not really
what it does...

  My Yager manual says not to use ethanol fuel but that's all we can buy around here
so I use the Startron and hope it helps!

  If you use Top Tier gas you probably don't need any other stuff, the problem is deposits
that clog small jets and injectors...
« Last Edit: January 26, 2014, 03:34:25 PM by MotoRandy123 »
2012 Yager GT 200I - Southern NH

tortoise

  • Hero Member
  • *****
  • Posts: 558
    • View Profile
Re: Fuel additive
« Reply #9 on: January 26, 2014, 05:14:23 PM »
Techron used to be good until they took the PEA out of it.
Just curious what your assertion is based on . . since it appears contrary to the information posted on the Techron website.

boo

  • Hero Member
  • *****
  • Posts: 926
  • I hate censorship people manipulate you
    • View Profile
yes
« Reply #10 on: January 26, 2014, 05:21:50 PM »
I use fuel stabilizers in all our small engines. Occasionally I add some carb/fuel injector cleaner.
I try to remember to do this but, if I forget, I don`t let it worry me.

I always use these if machines are stored for a time.

I know three brothers that own a boat sales business. They have been around and worked on boat motors for about 40 years.
This past summer I stopped at their place and was chewing the fat with one of the brothers.
I ask him what he thought about using fuel stabilizers, cleaners, and the effects of ethanol gas on small engines.
His reply was: ethanol gas is hard on seals in small engines.
We recommend ethanol free gas. If you have trouble finding it, use a stabilizer and occasionally add some carb/fuel injector cleaner.

I have read recently on the net that ethanol has a tendency to absorb water and that can cause problems.
Don`t know if this is true or not.

I tend to have faith in the guys that own the boat business. They have worked on engines their whole lives and they are honest, IMHO.
They sell only ethanol free gas at their business. High octane also. He told me it cost them about .03 more per gallon.
« Last Edit: January 26, 2014, 05:28:49 PM by boo »
300GTI black
Pro 2A - member GOA & NRA

tortoise

  • Hero Member
  • *****
  • Posts: 558
    • View Profile
Re: yes
« Reply #11 on: January 26, 2014, 05:58:41 PM »
I have read recently on the net that ethanol has a tendency to absorb water and that can cause problems.  Don`t know if this is true or not.
YouTube videos

boo

  • Hero Member
  • *****
  • Posts: 926
  • I hate censorship people manipulate you
    • View Profile
Re: yes
« Reply #12 on: January 27, 2014, 03:43:33 PM »
YouTube videos

Thanks tortoise.
Those were some very interesting vids.
I`ll watch more of them when I get time.
300GTI black
Pro 2A - member GOA & NRA

An Error Has Occurred!

Call to undefined function split()