« previous next »
Pages: [1]

Author Topic: Tune Up  (Read 885 times)

Jesse D

  • Newbie
  • *
  • Posts: 5
    • View Profile
Tune Up
« on: January 29, 2014, 11:12:42 PM »
I have a Kymco People 250. In the manual it states spark plug gap 0.6-0.7. By using a car gage, the numbers are as follows, .025, .030, .040 etc.....
Are the numbers the same? Also I noticed that on the engine side of the carburetor there are 2 small hoses. Where do these hoses go to because one is plugged with a screw. I just bought this bike and it has hesitation, that's why I'm trying to tune it up. Thanks, Jesse
Logged

MotoRandy123

  • Hero Member
  • *****
  • Posts: 978
  • Lets Ride!
    • View Profile
Re: Tune Up
« Reply #1 on: January 30, 2014, 12:19:36 AM »
0.6 mm = 0.23 in
The plugged hose doesn't sound right. You need to check the service manual to
see how it should go. Here's a couple of pics from the manual.

It has a fuel filter and a fuel pump. Might just be gummed up. Try some techron...
« Last Edit: January 30, 2014, 12:26:49 AM by MotoRandy123 »
Logged
2012 Yager GT 200I - Southern NH

Jesse D

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Tune Up
« Reply #2 on: January 30, 2014, 12:45:06 AM »
Thank You Sir for that info. I'll get on it tomorrow. I saw the pic's. On the engine side of the carb, there are 2 hoses. the one on the left is plugged with a screw. So I don't know where it's suppose to go. Thanks
Logged

Jesse D

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Tune Up
« Reply #3 on: January 30, 2014, 04:27:56 PM »

found it. Thanks
Logged

An Error Has Occurred!

Call to undefined function split()
Back