« previous next »
Pages: [1]

Author Topic: Bleed oilpump Super 9  (Read 1316 times)

Ice-Tray

  • Newbie
  • *
  • Posts: 13
    • View Profile
Bleed oilpump Super 9
« on: May 07, 2014, 03:24:18 PM »
Now I finally got the oil pump and installed it today. But wondering if I bleed the system properly.
Followed the service manual from Kymco.

I fill the oil pump with oil, place on the main hose and start the moped.
It drips out the other side. Should it just drip or shall it flow a lot?
Logged

245luigi

  • Sr. Member
  • ****
  • Posts: 334
  • Boston, MA
    • View Profile
Re: Bleed oilpump Super 9
« Reply #1 on: May 07, 2014, 05:35:00 PM »
Driiiiiiiiiiiiiiiip
Logged
Currently:
2012 Kymco Like70
72cc Malossi BBK
Dell'Orto PHBG 19 AS Carb
52 Pilot Jet
92 Main Jet
W7 Needle, 40 Slide
2T atomizer + bushing
Tecnigas Triops
Malossi Torque Driver

Ice-Tray

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: Bleed oilpump Super 9
« Reply #2 on: May 07, 2014, 06:30:31 PM »
OK, then its all good then.
Logged

Ice-Tray

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: Bleed oilpump Super 9
« Reply #3 on: June 25, 2014, 01:17:34 PM »
I'm not sure if the oil pump is properly in order.
When I bled the system so drypte the oil.
But when I'm driving now so decreases almost no oil at all.

How much oil is there it should use normal?
Logged

245luigi

  • Sr. Member
  • ****
  • Posts: 334
  • Boston, MA
    • View Profile
Re: Bleed oilpump Super 9
« Reply #4 on: June 25, 2014, 01:42:28 PM »
It takes me forever to use the oil in the tank, id say probably 10 or so tanks of fuel before the light comes on.
Logged
Currently:
2012 Kymco Like70
72cc Malossi BBK
Dell'Orto PHBG 19 AS Carb
52 Pilot Jet
92 Main Jet
W7 Needle, 40 Slide
2T atomizer + bushing
Tecnigas Triops
Malossi Torque Driver

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Bleed oilpump Super 9
« Reply #5 on: June 25, 2014, 05:12:16 PM »
Think about each stroke of the piston... It uses a MIST of fuel per. That mist will contain between 100:1 or 50:1 fuel/oil ratio.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Bleed oilpump Super 9
« Reply #6 on: June 26, 2014, 02:41:21 AM »
Slow drop drop drop out of the hose when run at speed.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

Ice-Tray

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: Bleed oilpump Super 9
« Reply #7 on: June 28, 2014, 08:15:09 AM »
Ok, tnx
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Bleed oilpump Super 9
« Reply #8 on: June 28, 2014, 08:23:23 AM »
I just caught the user name. LOL LOL LOL
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

An Error Has Occurred!

Call to undefined function split()
Back